tfs hi ports, jesels, vic jr intake with 2 foggers, shortblock

[johnquick302]

have a set of tfs hi ports, came off chad doyles drag radial car. currently on my 363ci 8.2 motor. has been 8.30s at 164 on 2kits.

2.125+.200/1.60+.200 titanium valves, triple springs, 350lbs of seat pressure, ported by ron sharp from advanced airflow eng.

jesel 1.7 ratio shaft mount rockers arms, customs stands, not the cheap 700ones they cost like 1350 new

edelbrock super victor jr intake, 2 nos foggers

trend 3/8 pushrods for a 8.2 deck motor

$4200.

or buy whole motor for $6500, in car running right now. should re ring it but you can still race it the way it is. intake to oil pan with nitrous kits, 363ci
crower hi po lifters, .800lift cam, custom diamond pistons, eagle crank, h beam rods, r302 block, romac balancer. msd dist. will not seperate unless heads and intake are gone. then will part shortblock out.


http://i238.photobucket.com/albums/ff288/johnquick302/motor%20pics/Picture040.jpg

http://i238.photobucket.com/albums/ff288/johnquick302/motor%20pics/Picture042.jpg

http://i238.photobucket.com/albums/ff288/johnquick302/motor%20pics/Picture183.jpg

[Pwraddr]

Ohh boy! GL with the sale John.

[johnquick302]

Ohh boy! GL with the sale John.

come get this from me. atleast top half of the motor. need some cash for the new motor

[Pwraddr]

come get this from me. atleast top half of the motor. need some cash for the new motor

Good price...but my shit is done already!

[johnquick302]

if it dont sell fast im just gonna keep it. just got a deal on some other stuff i dont want to pass up on.

[Pwraddr]

if it dont sell fast im just gonna keep it. just got a deal on some other stuff i dont want to pass up on.

I hear ya! Finally going Windsor?

can get those heads to work with more displacement....depnding how much more and how radical.

[GPowrie]

If you want to sell the Jesel's seperate I am interested in them. I have a set of comp pro magnums with stud girdles so you could still sell your stuff as a complete deal also.

[2 FAST 4 U]

where did you get the alternator bracket i need one just like it

[johnquick302]

If you want to sell the Jesel's seperate I am interested in them. I have a set of comp pro magnums with stud girdles so you could still sell your stuff as a complete deal also.

my buddy might have some t/d shaft mounts for sale, he wanted like $750 for them but im not sure if they are sold or not yet.

[johnquick302]

I hear ya! Finally going Windsor?

can get those heads to work with more displacement....depnding how much more and how radical.

yes these will work great on a bigger motor. they flow 360ish. i might be going a different route thats all im gonna say.

[Pwraddr]

where did you get the alternator bracket i need one just like it

Looks like a March to me....

[GPowrie]

my buddy might have some t/d shaft mounts for sale, he wanted like $750 for them but im not sure if they are sold or not yet.

If he does let me know. I want to put shaft mounts on my car if I can find a set for a decent price.

[Fryguy302]

$6500 for an 8 second combination is ridiculously cheap.

[red347lx]

$6500 for an 8 second combination is ridiculously cheap.

agreed!

[johnquick302]

im keeping cyl heads and jesels. everything else is for sale

msd dist with bronze gear, $150

shortblock with oil pan $1500

csi water pump $150, back cover was modified to work with a motor plate. will still work without one or you can order a new one

moroso vaccum pump with mandrel, $400

kooks headers, stainless modified by diamond fabrication so they dont hang low, with 3in x pipe with bullets. $800

intake with 2 foggers, jets and lines $1500

[jordanbmx]

im keeping cyl heads and jesels. everything else is for sale

msd dist with bronze gear, $150

shortblock with oil pan $1500

csi water pump $150, back cover was modified to work with a motor plate. will still work without one or you can order a new one

moroso vaccum pump with mandrel, $400

kooks headers, stainless modified by diamond fabrication so they dont hang low, with 3in x pipe with bullets. $800

intake with 2 foggers, jets and lines $1500

damn thats a good deal on the shortblock

[Anthony]

assuming hi comp short block? big domes..... any sleeves? standard cam bearings?

from whats for sale, i think i can finger out where your going :-)

[johnquick302]

assuming hi comp short block? big domes..... any sleeves? standard cam bearings?

from whats for sale, i think i can finger out where your going :-)

motor has some signs of abuse, it has a sleeve in it, its a 3k-4k short block all day 100%. its running right now, has oil pressure and will go 8s on nitrous the way it sits and run 10s on motor. standard cam bearing. dome pistons.

[jordanbmx]

motor has some signs of abuse, it has a sleeve in it, its a 3k-4k short block all day 100%. its running right now, has oil pressure and will go 8s on nitrous the way it sits and run 10s on motor. standard cam bearing. dome pistons.

i want it so bad dammit it prolly comes with the cam and lifters to huh lol i could bolt my victor jr and gt 40 heads right on it it wouldnt run as good but whatever lol damn trade for my little brother?

[johnquick302]

i want it so bad dammit it prolly comes with the cam and lifters to huh lol i could bolt my victor jr and gt 40 heads right on it it wouldnt run as good but whatever lol damn trade for my little brother?

comes with the cam not lifters, i just paid 600 for those not even a month ago. camshaft is big too, so you wouldnt be throwing on those heads unless you got some work done on them, good springs and longer valves. you will get coil bind with this cam in it.

[jordanbmx]

comes with the cam not lifters, i just paid 600 for those not even a month ago. camshaft is big too, so you wouldnt be throwing on those heads unless you got some work done on them, good springs and longer valves. you will get coil bind with this cam in it.

yea or i could put my cam and lifters in it lol ohwell im done thread hijacking i cant afford it, or ill work for you all summer??? ha

[johnquick302]

yea or i could put my cam and lifters in it lol ohwell im done thread hijacking i cant afford it, or ill work for you all summer??? ha

if i get rid of it, i need the cash to replace it.

[jordanbmx]

if i get rid of it, i need the cash to replace it.

deffenitly well good luck sorry for the hijack