Calling for Help. How to Get the Wheel Bearing Hub Assemly to seperate.

[Line Noise]

I have the axle out. (had to use a hub puller to push it backwards and it was a bitch. How do I get the HUb assembly to come out? all the bolts are off it.

[1BADAIR]

I have had to hammer them out. I loosen the bolts about half way then hit the head of the bolt

[Line Noise]

I have had to hammer them out. I loosen the bolts about half way then hit the head of the bolt

Gonna try that thansk

[Line Noise]

Ok, I put the Hub Puller on and Used a BFH and out it came. This was definatly the fucked bearing. The axle nut was just finger tight and the hub came out in 2 pieces.

Slapped it back together, The torqe Wrench I have only goes to 250 so I tightened it to that point Then Locked it and put a bar on the end and went hog wild tightening it D: Sure sounds better...

Appreciate everyones input.

[Sean124]

Ok, I put the Hub Puller on and Used a BFH and out it came. This was definatly the fucked bearing. The axle nut was just finger tight and the hub came out in 2 pieces.

Slapped it back together, The torqe Wrench I have only goes to 250 so I tightened it to that point Then Locked it and put a bar on the end and went hog wild tightening it D: Sure sounds better...

Appreciate everyones input.

Funny how the hub nut was loose huh. :crazy:

[1BADAIR]

There are a few models out right now that have issues with the packing nut coming loose.
not gonna say what cars though