coilover ?

[foxbodydave]

91 lx hatch...i wanna run rear coilovers....who makes a good kit and who on here is running them?

[Pure84GTT]

why not drag springs with and adjustable upper/lowers ?

[igotaneed4speed]

Most people using coil overs are due to having to relocate the springs because of tire clearance issues from doing a mini tub or sorts...

Unless your planning on making some pretty good power Its prob not ness.

[fogged10]

91 lx hatch...i wanna run rear coilovers....who makes a good kit and who on here is running them?

qa1 makes a really nice coil over!

[jakefb]

try strange

[foxbodydave]

thanks guys...im thinking about just lca and uca with drag springs and a bag...im lookin to put about 500 to the tire

[Team Z Motorsports]

dont use the drag springs and a bag! use stock springs and an ARB!

[foxbodydave]

why is my rear sitting so high? it has the 4cyl springs..i wanna get it looowwww and whats your price on the arb??
http://i228.photobucket.com/albums/ee314/dave_final/IMG_0421_1.jpg

[NVR2FST]

I had to cut coils off mine to get it to sit right. I'm running stock v8 springs...

[foxbodydave]

how many coils?? cause i have a stock set of GT springs in the garage
I had to cut coils off mine to get it to sit right. I'm running stock v8 springs...

[johnquick302]

how many coils?? cause i have a stock set of GT springs in the garage

its all different. just do a half coil at a time until you get it right. remember the car will settle a lil bit when driving it

[foxbodydave]

yep i do know that...the more i think about this summer the more i get all tingly inside...lol
its all different. just do a half coil at a time until you get it right. remember the car will settle a lil bit when driving it

[Pure84GTT]

:redstang: ..................:2000-pont....


this season :bigthumb:

[slickstang]

AUTO WELD CHASSIS Makes a very nice kit I used it on my car.

http://autoweldchassis.com/newprod.ivnu

79-93 Mustang


ANTI-ROLLBAR/COILOVER COMBO


This is the neatest setup
for the "Shoot-Out" Mustang classes
that allow coilover conversions. You
get a "hold-and-weld" crossmember with
all the mounts located for easy and fast
construction time, an anti-rollbar
that is an actual torsion bar, not a
piece of pipe as with some other
manufacturers, Aldan racing coilovers single or
double adjustible features, and the lower
6" ajustible coilover mount all for a
competitive price.
With single adjustible $699.95
With double adjustible $829.95

[Team Z Motorsports]

I've installed them on a few cars, altho the coil over disighn is good the anti roll bar is not! it's a torsion bar used in streetrod steering kits and the bushings are rubber!

I guess it would be ok for the street but nobody uses alden shocks for drag cars they are more of a street rod shock and are nitrogen charged!