03 Cobra motor + 93 Coupe = Badass (hopefully)

[sidewayscoupe]

New direction for my coupe. I will post some new pictures as things develop.


http://i58.photobucket.com/albums/g270/sidewayscoupe92/021708_23181.jpg

Sorry about the shitty camera phone picture.

[Im2slow]

that will be nice but you should give it to me.lol....

[NVR2FST]

Dan, there is one big problem with this...TIMING! Spring is almost here and you're taking the car apart!

BTW, that will be badass once it's done...good luck with the project.

[lightning Jeff]

Nice find, was it hard to get.

[sidewayscoupe]

Yeah I know. I am hoping the modular gods treat me well. And thanks, a little luck never hurts.

Dan, there is one big problem with this...TIMING! Spring is almost here and you're taking the car apart!

BTW, that will be badass once it's done...good luck with the project.

[sidewayscoupe]

Thanks. It took me about 6 weeks. And I knew the guy I bought it from....

Now I can stop looking at 03-04's!

Nice find, was it hard to get.

[cdz28]

Good luck thats gonna be badass when its done.

[Jenga]

When's the party to do this?

[sidewayscoupe]

I might take next week off and get started on it. I need to sell the turbo and a few other things and then its on.


When's the party to do this?

[Rickety]

Man........I've never seen that done before!!!

FYI....U can't use a Production Cobra Puter to run it....

Give up now....

:wiggle:

[Pure84GTT]

u can if u use the oem gauge cluster

[Pure84GTT]

awesome project, theres an italian dude that did this out in cali

cant remember his name off hand but hes all over the internet

[Rickety]

I'm messin wiff him.....I'm doin the same project....U don't need da gauge cluster.....




u can if u use the oem gauge cluster

[Pure84GTT]

what do you do to bypass it, i was under the assumption that you needed the oem cluster to run these with the oem computer

[91Notch]

good luck with the project Dan, I'd like to do the same thing to my notch one day

[P.F.M.]

Nope....Just Turn off da PATS


what do you do to bypass it, i was under the assumption that you needed the oem cluster to run these with the oem computer

[Pure84GTT]

noted thank you, you learn something new everyday ! can you turn the pats off with a normal snap on scan tool or do you have to be a ford tuner""

[team_southside]

badass project good luck

[fogged10]

dan there is no hopefully about it! that will be BAD ASS when it's done!

[sidewayscoupe]

LOL.

I get off the plane and turn on my phone to a new video message. Saso's shit runs on stock electronics without the cobra cluster. What a mod motor cock tease.


I'm messin wiff him.....I'm doin the same project....U don't need da gauge cluster.....

[The Man]

that guy is a friggin genius when it comes to fucking cars, seriously.

got access to another one Dem Dare engines? pm me. :)

[xtremewheelz]

:jawdrop: This is going to be killer when it gets finished!!!

[ReiKo]

Let me know if you need some help Dan... :icon_bigg

[Venmous28]

you pushrod guys cant wait to hop on the mod motor band wagon.. lol

[Rickety]

No Joke.....I don't even wanna werk on a 5.0 anymore....Pushrod 5.0 that is...

:naughty1:


you pushrod guys cant wait to hop on the mod motor band wagon.. lol

[Rickety]

Thanks for the kind werds....But far from a Genius....


:yt:



that guy is a friggin genius when it comes to fucking cars, seriously.

got access to another one Dem Dare engines? pm me. :)

[dirtybird]

He has a way with women thats for sure! Especially the Wrif chick!

[Rickety]

LOL


He has a way with women thats for sure! Especially the Wrif chick!

[Venmous28]

:naughty1:

big borin it eh?

:headbang:

[86 jewel]

you pushrod guys cant wait to hop on the mod motor band wagon.. lol

We pushrod guys have been starin at the wagon for a long time....its just to expensive to get on!!!!

[Venmous28]

ill sell ya a couple high priced tickets... lol

[86 jewel]

:icon_cry:ill sell ya a couple high priced tickets... lol

[sidewayscoupe]

Don't you have a Sonic Blue terminator?

We pushrod guys have been starin at the wagon for a long time....its just to expensive to get on!!!!

Ain't that the truth.

ill sell ya a couple high priced tickets... lol

[86 jewel]

Yeah so maybe i should shut up but i would love to have same motor in ny 86 that would be..... well you know

[orangejuiced86]

cool project. My next motor will be a mod motor also. I want to try one out.

[sidewayscoupe]

OJ telling me to do this.

http://www.motownmuscle.com/forums/showpost.php?p=1027270&postcount=190

Me bullshittin

http://www.motownmuscle.com/forums/showpost.php?p=1027307&postcount=192

Thanks man!

cool project. My next motor will be a mod motor also. I want to try one out.

[93-bucket]

Thats gonna be a bad bitch dan.. +1

[SVTSINR]

Sweet Dan, I'm glad the deal went through..

[sidewayscoupe]

Thats gonna be a bad bitch dan.. +1

Not as bad ass as your nitro burnin monster!

I have a friend who did this swap a few yrs ago...I'll email you some pics...It runs too!
Those motors are too new though, they are not allowed on the foodstamps purchase sheet just yet....

Shoot me some pictures man. I need to swing by and see the little one sometime.

Sweet Dan, I'm glad the deal went through..

Yeah me too. Now I can get too business. You ready for this 88 yet?

[SVTSINR]

You ready for this 88 yet?

Since Saso works on his everyday and all weekend long I figure I have till next year to line them up.

I'll be ready when you are. What's the MM saying " Lock it in! "

I might need that spare shortblock you have though....:naughty1:

[jtcstrat]

GL man, anything you do is going to be badass with that car!

[ReallyRedCobra]

Its like having the best mustang ever. Arguably one of the better body styles and best motors in 1.

[sidewayscoupe]

I was talking about the turbo! The short block is gone, we needed it for the 94 Cobra I sold my buddy. The engine in it was hurt pretty bad.

Since Saso works on his everyday and all weekend long I figure I have till next year to line them up.

I'll be ready when you are. What's the MM saying " Lock it in! "

I might need that spare shortblock you have though....:naughty1:

[sidewayscoupe]

I am not in a huge rush to sell the turbo now. If I can't get $900 out of it I will just keep it around for a paper weight.....

Yeah, since your changing just about everything around, why not keep that 88 and get rid of the blower too...????

[Jenga]

Dan, I have Tuesday off. Are you doing this or what? Need a hand?

[SVTSINR]

I was talking about the turbo! The short block is gone, we needed it for the 94 Cobra I sold my buddy. The engine in it was hurt pretty bad.

Ha..I thought you wanted to line them up. My bad....

Are you going to do the dual power adders with twin turbos plus blower combo good to 1k hp?

You know that 88 with that motor would be pretty mean?

[$uperstang]

That's gonna be SWEET Dan good luck bro!

[Rickety]

LOL....

Fucker........



OJ telling me to do this.

http://www.motownmuscle.com/forums/showpost.php?p=1027270&postcount=190

Me bullshittin

http://www.motownmuscle.com/forums/showpost.php?p=1027307&postcount=192

Thanks man!

[Jasper302]

I work with a guy in Canton who has a 87 notch and has the 03 04 cobra motor in it. If you any trouble I can ask him questions for you.

[93-bucket]

^where in G.C are you?^ Warren and Middlebelt here..

[Jasper302]

^where in G.C are you?^ Warren and Middlebelt here..

Henry Ruff and Maplewood. Just down the road.

[orangejuiced86]

when is the project gonna start?

[sidewayscoupe]

The car is back at my house. I will be pulling the 347 and trans this week. I also plan on talk to Dave Z about a K-member and front suspension as soon as tomorrow. I don't go back to work until 3/5 and plan on being a major pain is Saso's ass. :bigthumb:

when is the project gonna start?

[sidewayscoupe]

Does he work for Canton Twp?

I work with a guy in Canton who has a 87 notch and has the 03 04 cobra motor in it. If you any trouble I can ask him questions for you.

[soap]

Going to be a bad ass ride for sure!!

--Joe

[Jasper302]

Does he work for Canton Twp?

No.

[nwoh50]

Good site for cobra swaps
http://cobra4me.com

[hangemhigh]

We pushrod guys have been starin at the wagon for a long time....its just to expensive to get on!!!!

pretty complex and expensive for me. looks cool though. good luck with it!

[82hatch]

Can't wait to see the finished project! :thumbsup:

[$uperstang]

Post up the progress Dan?

[sidewayscoupe]

I didn't take any pictures yet. I hope to post some tomorrow.

Post up the progress Dan?

[86 jewel]

I didn't take any pictures yet. I hope to post some tomorrow.

Thats kinda a catch 22 i wanna see some pics...or do I??i lol

[SVTSINR]

I didn't take any pictures yet. I hope to post some tomorrow.


Booooo!!!!! where's the pics?

[NOBOOST]

Booooo!!!!! where's the pics?

Dan has been busy, so when I get home I will post some pics.

[riche]

That is nice of you, I have been at the edge of my chair waiting since his first post!!

[sidewayscoupe]

Progress has been slow, only really got started on it on Wednesday.

Booooo!!!!! where's the pics?

Thanks cupcake.

Dan has been busy, so when I get home I will post some pics.

All in due time grasshopper! :slomo:

That is nice of you, I have been at the edge of my chair waiting since his first post!!

[SVTSINR]

Geez..... it's just a a motor swap.

[sidewayscoupe]

I guess I am 1/2 way done then. :rockwoot:

Geez..... it's just a a motor swap.

[ReiKo]

Need a hand give me a shout... i'll come and help ya...

[riche]

Nice Dan, can't wait to see the finished product. Good luck to ya!!!

[Rickety]

Engine in yet????

[sidewayscoupe]

In the heezy.

Engine in yet????

[SVTSINR]

looks good... you should have it done by Monday? keep up the good work!!

:thumbsup:

[sidewayscoupe]

:theyareon

looks good... you should have it done by Monday? keep up the good work!!

:thumbsup:

[Shadowfox]

well! Hows it comming?

[sidewayscoupe]

Things are going slow.... Drank too many beers to make any real progress last night.

Ps. Stripping undercoat gets you high.

[Pure84GTT]

wheres the k member ?

[sidewayscoupe]

Had it in an pulled it back out, need to do some fine tuning. I still need to pull the booster, then the 4.6 goes in for a test fit.

wheres the k member ?

[91trunk]

Are you going to paint the engine compartment while it's torn apart? If not, you're a fucking fuck

[sidewayscoupe]

How much will your boy charge me to do it?

Are you going to paint the engine compartment while it's torn apart? If not, you're a fucking fuck

[Stang506]

looks like fun

[riche]

Make sure to take a lot of pics. Maybe one day I will have a nice terminator motor too and roll big time like you!! And thanks for the package, got it today and already on the car.

[91trunk]

How much will your boy charge me to do it?

PM Beau. He does killer work and I'd rather you give him the busines.

[sidewayscoupe]

I will send Beau a PM.

PM Beau. He does killer work and I'd rather you give him the busines.

[sidewayscoupe]

Thanks to Saso and Rick for the blinging caster camber plates.

Thanks to Dave Z. for the k-member/front end.

http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_3983.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_3984.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_3985.jpg

[Rickety]

Looks good.....Now get that Heater assembly out and call Reiko for the correct heater core.....

[sidewayscoupe]

OKAY
By: Nivea f/Lil' Jon & Youngbloodz
Submitted By: nivandman@xxx.xxx
[Intro]
La-la-la-la,
La-la-la-la, La,
La-la-la-la,
La-la-la-la, La,
La-la-la-la,
La-la-la-la, Laaa,
La-la-la-la,
La-la-la-la, Laaa,

[Verse 1]
Just got up in this party,
tipsy off this Bacardi,
bout to take this flight, so high,
say bye, bye.
We up in here all night now,
my girl like hey that's my song,
cuz I'm feeling fine,
(so fine,) so fine, (so fine,) so fine...

[Chorus]
All the girls that feel me say "okay"...
in the club u hear me say "okay"
feeling good, (feeling good,)
feeling great, (feeling great,)
I look good, (look good,) don't hate, (don't hate,)
If the fellas feeling good say "oh yeah"
and if your liking what u do say "oh yeah"...
feeling good, (feeling good,)
feeling great, (feeling great,)
u look good (u look good)
don't hate, (don't hate,)
All my girls get your hair fixed, and your nails done
put your hands up and say okay,
(okay,) okay, (okay,) okay, (okay,) okay, (okay,)..
u got the drink, (What!) get another one (Yeah!)
make him pay for it....
put it anywhere and say
(okay,) okay, (okay,) okay, (okay,) okay, (okay, yeah)..

[Verse 2]
Your hands all on my booty,
two stepping in my Gucci,
they're like..
go girl, (go girl,) go girl, (go girl,) go girl, (go girl,)
u like the way I shake it,
you wanna see me naked,
it could be your night,
your night...your niiighhtt.

[Repeat Chorus]

[Verse 3]
What's Happenin shorty,
I'm sean paul, let me holla atcha..
what I gotta do..
throw a couple dollas at cha?
Lift my arm, show my wrists
tell ya that I ball,
pick u up in Benz
and take ya to the mall
and all heres my number
shorty in case u want the street thing..
look me up I'll introduce u to a new game
show u where I hang..
girl u'll be my sweet thang
I love your style, love your nails and your tight jeans

[Verse 4]
I'm what u call a playa baby how u love that?
A youngblood feeling good and never laid back,
always run with that
goose and never Congnac,
and keep my ears to these streets
cuz that's where home at.
So whats shakin in this party,
pour a drink up and to my ladies lookin good
throw ur hands up.
Now where my fellas at,
ya know how we get crunk.
So DJ spin it
back for me now.

[Repeat Chorus X 2]



Looks good.....Now get that Heater assembly out and call Reiko for the correct heater core.....

[white out]

This is going to be a very cool build.

Nick

[STOCK GT]

Make sure to take a lot of pics. Maybe one day I will have a nice terminator motor too and roll big time like you!! And thanks for the package, got it today and already on the car.

I wish i took pics... maybe when i Pull it back apart to change a few things around i will take them then. I always forgeet to take the pics though!:nopity:

[STOCK GT]

SidewaysCoupe / Rickety

What Dash Are you guys using? if 94+ got pics of it?

Im wanting to do the 94+ in mine... Ive seen the pics on corral and looks sweet!

[sidewayscoupe]

As of right now the stock 93 stuff is still in it. I hope to use the 93 stuff this year, from what I understand the speedo maybe an issue. Eventually I would like to put a new dash/interior in the car.

SidewaysCoupe / Rickety

What Dash Are you guys using? if 94+ got pics of it?

Im wanting to do the 94+ in mine... Ive seen the pics on corral and looks sweet!

[riche]

I like the idea of the newer interior. I wish that I was living in MI so I could help you out with this. Remember the days at Ken and Rons off 5 mile when we had 4 cars torn apart.

[sidewayscoupe]

Oh I remember, good times!

I still need to get down to AZ sooner than later.

We are supposed to do some hot weather product testing with fleets down there fairly soon. I will keep you posted.

I like the idea of the newer interior. I wish that I was living in MI so I could help you out with this. Remember the days at Ken and Rons off 5 mile when we had 4 cars torn apart.

[Boost Creep]

Is that Black Over Spray (Not to be cornfused with Black OceanSpray) on your garage floor?
Just Checking.

[NOBOOST]

Is that Black Over Spray (Not to be cornfused with Black OceanSpray) on your garage floor?
Just Checking.

Thats from the garage being used...... It's not a kitchen..

[sidewayscoupe]

Did you ever get the bill for that?

Is that Black Over Spray (Not to be cornfused with Black OceanSpray) on your garage floor?
Just Checking.

[sidewayscoupe]

No shit.... His does make a really nice place to drink beer tho.

Thats from the garage being used...... It's not a kitchen..

[Boost Creep]

It is where the Doctor Operates!

[sidewayscoupe]

I thought it went more like this.



It is where the Doctor Operates!

[Lunger]

Thats from the garage being used...... It's not a kitchen..


So by that logic the, more shit and garbage on the floor the better the garage?


Rofl, But then again i did think that last pic was someone who just redid there kitchen

[93-bucket]

Dan, how is it going?

[sidewayscoupe]

Just got off work. I am down in Miami, I am going to shave my head and go look for J-Lo's little sister.

Wasup wit you?

Dan, how is it going?

[93-bucket]

fo shizzle!
How is the ride coming together?

[sidewayscoupe]

Basically ZERO progress. I've been trying to make some $$$$ and selling some parts to make room in the garage. I hope to be in town this week and make some more progress.

How is your hoop-T coming along?

fo shizzle!
How is the ride coming together?

[93-bucket]

Just going to drive it this year, That is the plan anyway:secret:

[Termin8orFox]

Lots of smack talking, how about some progress?? J/k........ Didnt have time to read through 12 pages. Where are you at with this project??


Rudy

http://i140.photobucket.com/albums/r9/Rudy41432/car71507087.jpg

[Termin8orFox]

Lots of smack talking, how about some progress?? J/k........ Didnt have time to read through 12 pages. Where are you at with this project??


Rudy

http://i140.photobucket.com/albums/r9/Rudy41432/car71507087.jpg


Hello? Anyone out there???


Rudy

[sidewayscoupe]

I am in the process of developing a new term. I like to call it "anti-progress".

[93-bucket]

lets all paypal dan $100 just so we can see this fucker done...LOL..
J.K cant wait to see it do a burnout in front of my crib again!!:peelout:

[sidewayscoupe]

Saso came over and kicked me in the ass tonight.

Sorry about the shitty cell phone pics.

[sidewayscoupe]

One more of the "test fit"

[foxbodydave]

damn its looking like some real progress is being made now

[1BADAIR]

Saso came over and kicked back a few beers tonight.
.

:specool:

[82hatch]

Awesome! :thumbsup:

[orangejuiced86]

sweet!!!!

[sidewayscoupe]

That was after work was done. We do NOT drink and wrench :icon_wink

:specool:

[Rickety]

Tis True.....


That was after work was done. We do NOT drink and wrench :icon_wink

[93-bucket]

lookin good!!

[P.F.M.]

kewl!!

[The Man]

so nice.

[Shadowfox]

:thatshot:

[Mustang5oh]

:drool::drool:
looks better in the car than on the floor!! bass ass!

[xtremewheelz]

Damn that looks good!

[SVTSINR]

Lookin Good! :thumbsup:

[93-bucket]

Lookin Good! :thumbsup:

LOL

[riche]

But the coors has that nice inner liner. Like it's coated with a thin candy shell.

[sidewayscoupe]

:cheers: You should have come over, Stanford left a bunch of Blue lights in the fridge you could have helped us make some room


Lookin Good! :thumbsup:

[sidewayscoupe]

:werd:

You going to be around the week of 5/12? If not plan on drinking some beers.

But the coors has that nice inner liner. Like it's coated with a thin candy shell.

[Rickety]

LOL!!!!!!!!!!!



Lookin Good! :thumbsup:

[orangejuiced86]

I have mad MOD motor envy right now.

[Rickety]

Take the road of the Modular............

Only way to go, along with a LS2.......




I have mad MOD motor envy right now.

[STOCK GT]

Take the road of the Modular............

Only way to go, along with a LS2.......


Im on the Fence,
Put the Mod motor back in or go to a Ls2...:pimp2:

[Termin8orFox]

Ready to bust that LS2 ass anytime......... BRING IT!!!!!!


Rudyhttp://i140.photobucket.com/albums/r9/Rudy41432/car71507087.jpg

[daveedsfast]

Ready to bust that LS2 ass anytime......... BRING IT!!!!!!


Rudyhttp://i140.photobucket.com/albums/r9/Rudy41432/car71507087.jpg

need more pics of that beast asap.

[riche]

:werd:

You going to be around the week of 5/12? If not plan on drinking some beers.


No, I will be closing on my new house out here. But I will be having some beers.

[93-bucket]

need more pics of that beast asap.

X2 nice ride!:thumbup:

[Termin8orFox]

http://i140.photobucket.com/albums/r9/Rudy41432/0424082018.jpg

http://i140.photobucket.com/albums/r9/Rudy41432/0424082019.jpg

http://i140.photobucket.com/albums/r9/Rudy41432/car71507087.jpg

http://i140.photobucket.com/albums/r9/Rudy41432/car71507080.jpg

http://i140.photobucket.com/albums/r9/Rudy41432/car71507077.jpg
http://i140.photobucket.com/albums/r9/Rudy41432/car71507070.jpg

This hood sucks my balls, sold it, never once drove with it on. My 2.5" is getting painted as we speak. All finishing trim and bs is also getting painted. Re-did the 1/4 glass trim also. Painting the a-pillar bars and such so I can finally get the interior in it....... Should have it at milan next month.......... Goes like a mofo. I was pleasantly suprised......http://i140.photobucket.com/albums/r9/Rudy41432/car71507068.jpg

http://i140.photobucket.com/albums/r9/Rudy41432/WorldFordChallenge37chevymustang132.jpg

Plenty of pics here: http://www.modularfords.com/forums/showthread.php?t=84597&highlight=03+cobra+build+pics

Car will be featured in Modified Mustangs mag very soon......................

Rudy

[93-bucket]

awesome, cant wait to see it in person!!

[Shadowfox]

awesome, cant wait to see it in person!!

X2

[Stangdriver627]

damn rudy, i'm buddies with a bunch of people in your pics hahaa


and sideways, looks like you're making, ummm, some progress haha :icon_bigg

~Alex

[CobraSVT657]

Thats Bad Ass

[93-bucket]

Bump for some motivation!!

[sidewayscoupe]

With a nice kick in the ass (THANKS SASO!), we started making some progress on my coupe again. I know it looks like it went backwards in progress, but he is helping me re-do some things.

The car is going for paint (engine bay) next Saturday.

http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_4860.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_4864.jpg

[jtcstrat]

fucking sick! This is my absolute favorite combo, notch with 4v...mmm.

One day i will.

[fogged10]

if you did not have that beer fridge in the garage more shit proably would get done! lol

[1BADAIR]

are you gonna fill some holes?
I think I have something you need

[sidewayscoupe]

Thanks

fucking sick! This is my absolute favorite combo, notch with 4v...mmm.

One day i will.

Yup :cheers:

if you did not have that beer fridge in the garage more shit proably would get done! lol

We filled the sway bar mount holes, but that was pretty much it.

What you got?

are you gonna fill some holes?
I think I have something you need

[Pwraddr]

Why did you sell the front end/suspension you had for it? What are you using now?

[sidewayscoupe]

I sold it because I really want to drive it alot on the street . I have an AJE K member on the way that has the provisions for a 4.6 in a Fox and allows the use of stock arms and conventional springs.

Nothing against Daves stuff, I really want to put some miles on it this year and think the AJE route is more suited for a street car.

Why did you sell the front end/suspension you had for it? What are you using now?

[Pwraddr]

I sold it because I really want to drive it alot on the street . I have an AJE K member on the way that has the provisions for a 4.6 in a Fox and allows the use of stock arms and conventional springs.

Nothing against Daves stuff, I really want to put some miles on it this year and think the AJE route is more suited for a street car.

Cool....just curious:cheers:

[The Man]

if you guys need an extra set of hands, let me know. I need to hook up with Saso one of these days anyways, I got some springs for him. :)

oh, and badass. goad to see your making some progress on it finally. :drool:

[Shadowfox]

Im not much for red cars but that car is going to be sick!!!!!

[sidewayscoupe]

Thanks for the offer! You might have fucked up, because Im gonna call.

if you guys need an extra set of hands, let me know. I need to hook up with Saso one of these days anyways, I got some springs for him. :)

oh, and badass. goad to see your making some progress on it finally. :drool:

Thanks.

And believe me, I wish it was white or emerald green...... but red is going to have to do for now.

Im not much for red cars but that car is going to be sick!!!!!

[cobra tom]

your project, will be my next project, i miss my cobra

[TURBO'D 428 C.I. STANG]

looks great!

[Shadowfox]

Thanks for the offer! You might have fucked up, because Im gonna call.



Thanks.

And believe me, I wish it was white or emerald green...... but red is going to have to do for now.

YES!!!! i am obsessed with that color my next one will be that color!

oh you know im down to lend a hand always bro i love this stuff !!!!

[Anthony]

I sold it because I really want to drive it alot on the street . I have an AJE K member on the way that has the provisions for a 4.6 in a Fox and allows the use of stock arms and conventional springs.

Nothing against Daves stuff, I really want to put some miles on it this year and think the AJE route is more suited for a street car.

hopper just gave away ( CHEAP ) a griggs motorsports k member, and a set of custom headers, CHEAP.

[91Notch]

very nice Dan

Let me know if you need anything. :thumbsup:

[Jenga]

Looks good, lets go tear up some Miata's in AZ. Whats your travel plans?

[Stangdriver627]

looks good man, i remember seeing it awhile back when i was over picking up some old suspension stuff with a buddy of mine.

~Alex

[sidewayscoupe]

Yeah I am pretty sure you guys drove out in a snow storm last year to pick some stuff up!


looks good man, i remember seeing it awhile back when i was over picking up some old suspension stuff with a buddy of mine.

~Alex

[sidewayscoupe]

Big thanks to Matt, Saso, Carl and my bro for helping out this weekend.

http://i58.photobucket.com/albums/g270/sidewayscoupe92/Sundaynight.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_4935.jpg
I still need to pull the hood back off in order to get some better pictures. I am really happy with the way it came out!

[P.F.M.]

Awesome!!!

[ReiKo]

Very nice...

[GTPprix]

Wow that thins is going to be 'tits!!

[93-bucket]

Thats perrdy!!

[The Man]

its almost as shiny as Air-ons...

looks sick Dan, just sick. :eek:

[Rickety]

Looks Kwality.....

Shoulda gave him yer Jackstands to paint too....They dont match....

I'll get that udder shit welded so you/we can put that shit back together....


:cheers:

[91Notch]

looking good Dan :thumbsup:

[The Man]

You guessed it....

:lol:

[sidewayscoupe]

Thanks guys.

[orangejuiced86]

very nice!!!!

[SVTSINR]

Looks great Dan. Keep up the good work and hopefully will see it out this year...

[Stangdriver627]

Yeah I am pretty sure you guys drove out in a snow storm last year to pick some stuff up!

yes we did, and that sucked somethin terrible haha we were all over the state that night, and i have no idea why the hell we did that haha


Car's looking great so far, can't wait to see it on the road.

~Alex

[Venmous28]

hell, i'll help if you need it too..

[90blknotch]

Look great Dan! Thank God not another black engine compartment in a red car! I am going to do the same swap on my car except with a C4. Where did you get your motor? Mike and I just bought a '01 cobra vert (salvage!) and I am putting the motor in the '99 cobra that has the spun bearing. '01 is mechanically good - let me know if you guys (or somebody else you know) needs any cobra parts! Its got the black/grey suede interior. '99 will be for sale too when its finished!

[sidewayscoupe]

Mike and Kyle freshend up my front control arms for the coupe

http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_8151.jpg

[sidewayscoupe]

Thanks Sean! I got the motor from a buddy who ran into to money problems. I will keep an eye out for another 03/04 setup.

I might be interested in some stuff off that car.

Look great Dan! Thank God not another black engine compartment in a red car! I am going to do the same swap on my car except with a C4. Where did you get your motor? Mike and I just bought a '01 cobra vert (salvage!) and I am putting the motor in the '99 cobra that has the spun bearing. '01 is mechanically good - let me know if you guys (or somebody else you know) needs any cobra parts! Its got the black/grey suede interior. '99 will be for sale too when its finished!

[Shadowfox]

lookin good bro

[90blknotch]

Thanks Sean! I got the motor from a buddy who ran into to money problems. I will keep an eye out for another 03/04 setup.

I might be interested in some stuff off that car.

Lemme know buddy! You got first dibs...

[fogged10]

looks great dan!

[John Boschma]

maybe this one can help with ideas?
http://www.svtperformance.com/forums/other-vehicles-buy-sell-268/525807-93-04-cobra-fox.html

or thise one if you wanna get a little crazier.

http://www.svtperformance.com/forums/other-vehicles-buy-sell-268/555327-turbo-4v-coupe-sale.html

[sidewayscoupe]

I've been out of town for the last couple weeks and came home to some goodies for the coupe.


http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_8487.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_8488.jpg

[Rickety]

LOOKS MINT!!!!!!!!

I'll be over in da late AM tomorrow

:cheers:

[91Notch]

looking good Dan :thumbsup:

wanna do a white one next ;)

[P.F.M.]

Very nice!

[LtDan313]

Nice project I am doing the same but am in a financial crisis. I might sell mine if I get the right offer. Good Luck.

[jtcstrat]

we are trading cars when you are done :)

Looking good bro!

[sidewayscoupe]

Started making some progress on the coupe again. The T56 is getting some upgrades.

The tensioners and crank pully/cage will get the flat black treatment in the next couple days....

Thanks goes out to Saso and Kyle for the help!

http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9884.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9885.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9889.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9890.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9891.jpg

[orangejuiced86]

Looks great!! I see your progress moves at just about the same rate as mine!

[mikesfastss]

Looks good dan stay at it:thumbsup:

[hangemhigh]

Looks good dan stay at it:thumbsup:

looking good dan.....:thumbsup:

[JoeP.]

Looks clean!

[Rickety]

:thumbsup:

[SVTSINR]

The flat black looks good. I kinda wish I went that route instead of satan black..

[Rickety]

Ya know what they say.....

"U can wish in one hand, and crap in the other".....

Quit livin in the past....No Future in the Past....


:buds:


The flat black looks good. I kinda wish I went that route instead of satan black..

[93-bucket]

I wonder if this thread would be considered vintage porn..

[69 mach]

be a nice ride.

[P.F.M.]

awesome.....

[fogged10]

awesome.....

x2

[hsean1]

man i would love to have that motor for my project thats going to be badass

[sidewayscoupe]

Thanks guys!

I got a chance to throw some paint on the parts that could'nt be powder coated today.

http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9892.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9893.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9894.jpg

[11secSVT]

Way cool...you gonna have it out next summer?

[The Man]

sick....looks like a twin to one in a certain Cobra, well not exactly a twin.

good job. :thumbsup:

[jtcstrat]

looking good bro, love the black, you running a t56?

[sidewayscoupe]

Thats the plan! I would like to do some NMRA True Street events next year.

Way cool...you gonna have it out next summer?


Thanks Rick.
sick....looks like a twin to one in a certain Cobra, well not exactly a twin.

good job. :thumbsup:

Thanks Jon, Gonna go with the T56 to start.

Its getting some upgrades to handle the Whipple HP/TQ.

looking good bro, love the black, you running a t56?

[91Notch]

very cool Dan :thumbsup:

[347SCNOTCH]

the black looks sweet. put an electric water pump on it then u only need the blower belt cuz it drives the alternator

[347SCNOTCH]

unless your gunna put power steering on it that is

[SVTSINR]

WTF? No a/c?

[jtcstrat]

got any extra t56's laying around? lol

[sidewayscoupe]

The powersteering pump isn't installed in the pictures but will be.

the black looks sweet. put an electric water pump on it then u only need the blower belt cuz it drives the alternator

unless your gunna put power steering on it that is

No A/C. Windows down with Limp Bizkit bumpin :wink:

WTF? No a/c?

Nope no extra t56's. Got an extra 3550 but thats for A-rons junker.

got any extra t56's laying around? lol

[2000Durahoe]

Very cool! I love when people do this swap. I always wanted to but I wised and bought an Fbody. :thumbsup:

[NVR2FST]

Looks good Dan! I'm thinking about running my car in True Street next year also...maybe we'll meet up at the tree ;)

[Fryguy302]

Looks great Dan!

[Violent J]

:wank:

[sidewayscoupe]

Kyle was nice enough to drop off a couple more items for me tonight! Thanks buddy!
Canton power steering reservoir
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9895r.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9896r.jpg
EGR block off plate.....no big deal but at this point it made sense....
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9897r.jpg
Steeda Caster Camber plates
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9898r.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9899r.jpg

Mark it would be sweet if we met at the tree, I am sure you would put an ass whoopin on me tho!
Looks good Dan! I'm thinking about running my car in True Street next year also...maybe we'll meet up at the tree ;)

Thanks Raj!
Looks great Dan!

:buds:
:wank:

[riche]

Looking good Dan. Glad to see that you are making progress. That would look sweet in one of my black cars!!

[jtcstrat]

jealous.

[91trunk]

Holy Shit that engine bay looks amazing! Nice paint :D

[sidewayscoupe]

Larry the paint huffer knows his shit! His agent aint half bad either...

Holy Shit that engine bay looks amazing! Nice paint :D

[Shadowfox]

killer bro

[hangemhigh]

Holy Shit that engine bay looks amazing! Nice paint :D

Larry the paint huffer knows his shit! His agent aint half bad either...


nice attention to detail...:thumbsup:

say....i heard you grabbed that roof. good looking.....

[82hatch]

Looks great Dan.

[91Notch]

Very nice Dan.

I'd like to check it out next time I'm over that way

[sidewayscoupe]

Freshening things up have made a huge difference, and thanks again for the lead on the roof. Jordan is a good shit!

nice attention to detail...:thumbsup:

say....i heard you grabbed that roof. good looking.....

:buds:

Looks great Dan.

:buds: Just say when!

Very nice Dan.

I'd like to check it out next time I'm over that way

[sidewayscoupe]

The powered by SVT coil covers were dark grey and didn't look right, I was thinking about doing them red to match the car but Kyle thought wrinkle would look better...... I am glad I listened to him :thumbsup:

http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9906.jpg
http://i58.photobucket.com/albums/g270/sidewayscoupe92/IMG_9907.jpg

Oil cooler and alternator are next.

[Venmous28]

holy pulley mess.. theres like 100 pulleys on that thing.. :lol:

looks good.. i'm jealous i didnt take the time to coordinate as much as you are. i got some powdercoating done but yours is just awesome. love all the new non-corroded bolts too.. ha

[Detroit Style Dragger]

Love it, it looks so deliciously stock yet, its not.

[loper43]

beautiful work

[SVTSINR]

Any updates? Besides more cool powder coating....

[sidewayscoupe]

Its for sale. You interested?

Any updates? Besides more cool powder coating....

[riche]

are you serious about selling it?

[SVTSINR]

Its for sale. You interested?

Nope, that car is way to nice for me. I like my rollers rusted and ragged out..

[Shadowfox]

Its for sale. You interested?

tell me you kidding :ohmy:

[82hatch]

tell me you kidding :ohmy:

x2!

[91Notch]

x2!

x3!

[Ozz]

Just read through the whole thread, wasn't expecting a sale. Hopefully you're kidding, I'd like to see this thing completed!

[jtcstrat]

how much? ill trade you a turbo new edge car, just needs to be put together like yours. :)

[sidewayscoupe]

SIKE! its not for sale.

There will be an add in the correct forum "if" the time comes.

[P.F.M.]

pffffttttt dont even go there...

[91Notch]

SIKE! its not for sale.

There will be an add in the correct forum "if" the time comes.

:rockwoot: