Different kind of notch

[BIGCOWL-IMP]

This is the second day i got it and after selling a few parts off it i ended up with a $750 roller. The thing is mint no surface rust and 42,xxx miles.


http://i51.photobucket.com/albums/f393/bigcowl-imp/92sspnotchbackand93notch002-1.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/92sspnotchbackand93notch001.jpg

Then i switched it to 5 lug and put my impala wheels on it after buying new centers for the rims.

http://i51.photobucket.com/albums/f393/bigcowl-imp/Badasscoupeparts036.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/Badasscoupeparts031.jpg

Yes i got real lucky with the mustang the guy just had it pianted and he wet sanded about 3/4 of the car and lost interest. When i went and looked at it i could tell the clear coat was pritty thick and new it would turn out nice. I hoped ? When i was there looking at the car he must have had 8-10 calls on the car. So i gave him a deposit and got it the next day. I finished wet sanding it and payed a freind to rub it out and it turned out sweet Paint looks awsome. Its way cleaner then my 95 impala that i did not drive in the winter. But the car had clean ugly maroon interior so that came out and i bought black piece here and there and have everthing now and looks sweet.


I got the motor biult installed and the th350 trans and installed last week end. Worked on it all day. I did this all today so its still a mess. OH and i can change plugs and plug wires in 20-30 minites tops i love it.

http://i51.photobucket.com/albums/f393/bigcowl-imp/freshmomo001.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/freshmomo002.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/freshmomo003.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/freshmomo006.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/freshmomo009.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/freshmomo010.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/freshmomo011.jpg

update 3/19/08

Might be fireing it up this week end:D
I ended up buying a painless wireing harness to make it easier and it was actally painless:D it comes with a ALDL port and check engine light so i wired in my lt1 scanmaster. My friend and i got all the gauges wired up and got all the lights, brake lights, power windows and trunk popper working. I will have a update in a few days and maybe a video ?


http://i51.photobucket.com/albums/f393/bigcowl-imp/62l92021.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/62l92024.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/62l92026.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/62l92030.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/62l92031.jpg

[jtcstrat]

looks good! love the color.

One thing i have always hated bout most notches is the mess of wires in the engine bay lol

[Speedy]

Nice work!

[orangejuiced86]

Looks awesome!!!! GREAT JOB!!!

[91Notch]

that's the same color as my wife's notch

[dirtybird]

Now that's nice!

[Im2slow]

looks good

[82coupe351]

Damn looks good. cant beat the price either....

[fogged10]

very nice! what size tires on the rear?

[BigWheelinBubba]

You got the best of both worlds... A notch with a bad ass Chevy motor in it! :thumbsup:

[BIGCOWL-IMP]

Thanks guys

The rear tires are 28x11.5 et street. They looked tiny on my impala.


http://i51.photobucket.com/albums/f393/bigcowl-imp/truckimpalahobby031.jpg

[FLAGMANBILL]

looks good, looks like i am gonna need a few cars now!

[hangemhigh]

very nice notch

[CableGuy]

Is that an LT1?

[fogged10]

Thanks guys

The rear tires are 28x11.5 et street. They looked tiny on my impala.


http://i51.photobucket.com/albums/f393/bigcowl-imp/truckimpalahobby031.jpg

they look awesome on the stang! what size rim and back spacing on the rear's?

[BIGCOWL-IMP]

There a 10x15 with a 6inch back spacing

Bill i don`t think so mister:)

[Shadowfox]

Is that an LT1?

Yeah! It was, not sure what it is now.





Thats going to be a badass.

[notched88]

Wow great job.

[little2v]

Really nice looking notch!

[SS4Matt]

very nice, i've seen some of your posts on ls1tech. could use some organizing of lines and wires but the paint and rims look bad ass!

[adam351]

that cars nice man! i love dark grey foxs

[cdz28]

Looks good, Great choice of a motor!

[xtremewheelz]

Looks awesome. Keep us posted.

[82hatch]

Looks good!

[STOCK GT]

Car/Combo looks/is Badass!

[riche]

Very nice ride that you have. It would be sweet to see yours and sidewayscoupe line up and run.

[phatstang]

holy crap....great deal and a awsome job.........congrats

[NOAVG5.0]

That thing is sweet and the one in the back round with the ten holes looks good to. What size hood is that?

[P.F.M.]

Man that car is nice! Great detail...

[Chris Hansen]

Wow dude, that thing looks amazing!

[BIGCOWL-IMP]

Thank you guys.........The hood measures 4 1/2 inches witch i don`t really like but it lines up nice.

YAAHOOO I drove it out of the garage today:) I would have drove it around the hood but the street is muddy and the car is mint.

http://i51.photobucket.com/albums/f393/bigcowl-imp/coupewithmotor002.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/coupewithmotor001.jpg

[Gold Rush]

Damn, nice car!

[315plus]

Man that looks sweet! Just take the center caps off the rear wheels.. What do you have to correct opti-spark.

[93notch76]

sweet notch sweet color not sure about chev motor though im a ford nut

[BIGCOWL-IMP]

Why do people leave the rear caps off ?? I think it would look incomplete without them.
I have a spare opti on the self but so far i have not needed it in the last 7-8 years i had it. I guess i`m one of the lucky ones..........yes i just knocked on wood:)
Thanks again guys..............I`m going for a ride.

[NOBOOST]

Your car looks badass. So, how did the ride go?

[BIGCOWL-IMP]

Not good ...no 3rd gear and i got the car dirty.

[Shadowfox]

that sucks man whats the plan now ??

[315plus]

Why do people leave the rear caps off ?? I think it would look incomplete without them.
I have a spare opti on the self but so far i have not needed it in the last 7-8 years i had it. I guess i`m one of the lucky ones..........yes i just knocked on wood:)
Thanks again guys..............I`m going for a ride.

I guess so people can see their moser stickers on the axles, lol

[Shadowfox]

any updates???

[BIGCOWL-IMP]

Yes i got the car all nice and clean and shinny:)

[BIGCOWL-IMP]

Trans should be done end of this week.

[dirtybird]

Car looks awesome!

[Foolsgold80z]

I think it's not legal have center caps in the drive wheels as they can fly off?

[BIGCOWL-IMP]

I got the fresh trans back in and its working great. Now i just got to get some rear syspension work done. I had it on teleghaph saturday nite with my 05 grey bullit wheels on it. I will get pics in a day or 2.

[supernotch90]

LOVE A CLEAN NOTCH

[pumpkinhead]

car looks great, wheels make big change.

[juicedz]

That car is so nice and it sounds like you got a killer deal on it! Take some more pictures of it and post them up. Hey, how about a vid since it's running now?

[BigWheelinBubba]

I got the fresh trans back in and its working great. Now i just got to get some rear syspension work done. I had it on teleghaph saturday nite with my 05 grey bullit wheels on it. I will get pics in a day or 2.Wheres those pics at? :dontknow:

[BIGCOWL-IMP]

Dog got in the last pic


http://i51.photobucket.com/albums/f393/bigcowl-imp/IMG_0003-1.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/IMG_0002-1.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/IMG_0001-1.jpg

[riche]

doesn't look right with the wheels. Are they 05 and newer offset cause they look to be the wrong offset.

[BIGCOWL-IMP]

ya i know and yes 05+. i had to use about a 3/8 spacer in the front with longer wheel studs and the rears still need to come outward i little more. I just wanted to drive it.

[juicedz]

Yea, I'd leave the racing wheels on it all the time...lol. Did you end up selling your impalas or something? What's the set up on the motor, heads/cam/intake/nitrous?

[BIGCOWL-IMP]

Ya i sold both of my impala`s
The motor is a stock short block with new pistons etc 355ci. The lt4 heads are the ones i ran about 8-10 years ago. Has a small solid roller cam. I`m useing the nx maf system with the second stage 150 each. I still need to get the rear torque boxes welded up so thats why i took the other wheels off.

[NTAHORS]

Nice looking car to bad it has an infection:seizure: J/K.... Looking good.

[Lemans]

Stang looks great, can't wait for a ride. Hey man, my dad's Vette needs the rear end gone through, can Ronnie do it for him? My Lemans is getting the dents repaired and should be ready to spray in 2 weeks! Call me... MF!

Scott

[b.lee]

:thumbup::thumbup::specool:

[BIGCOWL-IMP]

Scott whats up ? We took Chris 68 lemans out sarurday nite till about 3am and whipped up on a couple fast cars but they were not fast enuff had a blast. Ya Ronny could do it but he lives to far away. I have freind that has a shop near me that can do it and would do it while we wait maybe ? Is the rear out of the vett ? What rear is it ? What needs to be done ?

[Lemans]

Tim

My dads wrenching the rear out now. It is the factory 3.70 posi that has been gone through not too long ago. The right side is sloppy (1/4" play) also need new wheel bearings. Let me know.

Scott

[Stationwagonguy]

Very nice. I'm a sucker for Fox-body notches, and the color looks great. :)

[BIGCOWL-IMP]

Thanks again guys and out with the old and in with the new.

http://i51.photobucket.com/albums/f393/bigcowl-imp/my001.jpg

http://i51.photobucket.com/albums/f393/bigcowl-imp/boobooandwireing018.jpg

[hangemhigh]

nice to see this car again......:thumbsup:

[ls1sleeper]

damn loooks badass

[dirtybird]

O hell yes.

[MSTREP22]

holy shit

[00sonolow]

Sickk.

[Teef racing]

you have one nice ass car!! looked like it was moving out last weekend when you got on it..

[BIGCOWL-IMP]

Thanks it seems to run vary well for what it is it has a hyd. roller cam and pump gas.
The f.i. lt4 motor i had was problem after problem so i parted it out and put this ls carbed motor together and i have not had one problem i love it. Next week i`m getting the cage installed and the torque boxes welded up then the fun starts. Thanks again guys
Oh and who wants to run motor to motor :)

[82iroc]

damn that car is sick and great choice on the motor cant go wrong with chevy

[ls1sleeper]

Thanks it seems to run vary well for what it is it has a hyd. roller cam and pump gas.
The f.i. lt4 motor i had was problem after problem so i parted it out and put this ls carbed motor together and i have not had one problem i love it. Next week i`m getting the cage installed and the torque boxes welded up then the fun starts. Thanks again guys
Oh and who wants to run motor to motor :)

ill try it out i got the same setup hyrdralic roller stock shortblock pump gas

[BIGCOWL-IMP]

Do you ever come up to ocb`s ?

[BIGCOWL-IMP]

Heres a little update.......the new fresh LS motor is running vary well but i can`t get the car to hook up on the street or track. First i tried the M.T E.T. streets 28/11.5/15 and they never hooked so i bought brand new M.T. E.T. drag radials 275/60/15 and they will not hook neither.
So now i`m look for some slicks.

http://i51.photobucket.com/albums/f393/bigcowl-imp/stangbore003.jpg
http://i51.photobucket.com/albums/f393/bigcowl-imp/stangbore004.jpg

[quickstang1983]

Hey, I've seen that car somewhere.....:gr_grin:.

[papa-bach-racing]

you need slicks most deff them motors are strong bitches lol looks good.... do you have a anti roll bar...

[Detroit Style Dragger]

I love that color.

[jordanbmx]

i saw how well that thing ran last saturday and ill back the fact that thing doesnt hook on the street even from a roll

[1badford]

i saw how well that thing ran last saturday and ill back the fact that thing doesnt hook on the street even from a roll

x2

[BIGCOWL-IMP]

Yes i do have a anti roll bar but its not installed yet. Ya last Sarurday night sucked i lost $......Anyone no how fast that s10 is ?
If you guys see any 28/9/15 slicks f.s. let me know.

[ls1sleeper]

set the pinion angle at -3 i have a 86gt with a ls1 my car will hook in dirt,

by the way car looks awsome bro

[BIGCOWL-IMP]

Thanks.......even with solid bushings ? I think i`m at -1

[b.lee]

That thing is badass,
"Built Ford tough, with Chevy stuff"

[5.0_Pony]

This car will be very nice when its done! Good work! :thumbsup:

[koz]

i told you so tim ? - 3 degrees of pinon angle well maybe put you in the winners circle? on tell i get home from the south..then u going 2 neeed a very big shot of hose 2 get by that old ass rusty ass green 68 lemans with a tiny little tire ?

[greentrunk]

yeah last weekend this car was moving, good thing you got it under control though

[chevelledave]

try your drag radieals at around 16 psi and work down...they also like a soft compression on the shock with a tight rebound ...double adjustable stange is what i use ...The DR's will hook but they take a little more tuning ..

[BIGCOWL-IMP]

Ya i took it back to Milan to see what would happen and i lowered the presure down to 15psi and did a real good and long burn out. I ended up spinning for about 100 feet. I`m going to double check pinion angle today or tomorrow and maybe install my new anti roll bar ?

[Lemans]

Hey man!

Finally got my old computer to run right and I'm back! Holy shit that notch is freakin' evil! Can't wait for a ride! Maybe you'll get that thing in the mid 11's.;)
I still haven't yanked my shortblock out of the convertible yet, no time lately. So far all I know is number eight piston is missing peices, bottom end may have more ugliness. Got a spare ls motor i can build to put in the Pontiac?...Yeah right, I'm broke. Anyway, hope all is well with you, keep in touch.

P.S. I'll e-mail some pics to you soon of my car.

Scott

[69 mach]

looking good.

[BIGCOWL-IMP]

Yaahhooo i won my money back from that s10.....his hose to my motor and i got him buy maybe 4-5 cars. I love these 28/10.5/15s slicks.

Scott i have a ls3 block and bare l92 heads f.s.
Send those pics please

[nickgregg2007]

Yaahhooo i won my money back from that s10.....his hose to my motor and i got him buy maybe 4-5 cars. I love these 28/10.5/15s slicks.

Scott i have a ls3 block and bare l92 heads f.s.
Sent those pics

man your sit must run good! i kno what that truck runs

[BIGCOWL-IMP]

Heres where i win my money back.You will see i can`t keep the car from moveing because i don`t have a line lock.

YouTube - wereuat

[99slverZ]

Is this the one thats up at OCB's a lot? Great looking car. Some dumbass was trying to tell me it was an LSX block and it made over 800HP on motor. I almost fell over laughing. Unless your stripped the orange powder coating off a LSX block I don't think so. :buds:

You shaved the casting numbers off the heads and wrote "hi" didnt you? LOL

[quickstang1983]

Glad to hear you won your money back. Don't get to cocky though cuz you might have to go up against me next time....:sagrin:.

[1BADAIR]

you don't have to strip the powder coat. it falls off

[99slverZ]

you don't have to strip the powder coat. it falls off

Your still not making 800HP N/A with a car that idles like his. Runs good, but not that good. :thumbsup:


EDIT- No numbers and no set up info even on the tech. He's smart. ;)

[nickgregg2007]

Glad to hear you won your money back. Don't get to cocky though cuz you might have to go up against me next time....:sagrin:.

lol :shutup:

[quickstang1983]

lol :shutup:

What?

[BIGCOWL-IMP]

Is this the one thats up at OCB's a lot? Great looking car. Some dumbass was trying to tell me it was an LSX block and it made over 800HP on motor. I almost fell over laughing. Unless your stripped the orange powder coating off a LSX block I don't think so. :buds:

You shaved the casting numbers off the heads and wrote "hi" didnt you? LOL

Ya thats me and ya who ever told you 800hp with a LSX block is full of it. You can clearly see its a aluminum block. I don`t think you can make 800hp with a hydrolic roller cam on 93 pump gas ?

[BIGCOWL-IMP]

Glad to hear you won your money back. Don't get to cocky though cuz you might have to go up against me next time....:sagrin:.

Are you ready ??$$:-)

[quickstang1983]

Are you ready ??$$

LOL! You know I have nothing for your car. Although mine doesn't spin on the street either....:mmm:.

[BIGCOWL-IMP]

LOL! You know I have nothing for your car. Although mine doesn't spin on the street either....:mmm:.

I now have new 28/10.5/15s M.T. E.T drag slicks. ........How many you need ;~)

[quickstang1983]

I now have new 28/10.5/15s M.T. E.T drag slicks. ........How many you need ;~)

It still looked like you spun in that video. But i'll need a couple for sure.:redface:

[quickstang1983]

Actually i'd rather go heads up. I don't mind losing, especially against a car like yours!

[weryaat]

Ya thats me and ya who ever told you 800hp with a LSX block is full of it. You can clearly see its a aluminum block. I don`t think you can make 800hp with a hydrolic roller cam on 93 pump gas ?

I think the extra set of mufflers are working Tim....:thumbsup:

[BIGCOWL-IMP]

Actually i'd rather go heads up. I don't mind losing, especially against a car like yours!

hmmm maybe i need cars;-).........let me know when your ready.

[BIGCOWL-IMP]

I think the extra set of mufflers are working Tim....:thumbsup:

OOHH ya i forgot that i also have 4 mufflers on the car.

[nickgregg2007]

I now have new 28/10.5/15s M.T. E.T drag slicks. ........How many you need ;~)

to many lol that race u were on motor?

[ls1sleeper]

Are you ready ??$$:-)

yup come on pm me well race when weather is nice

[koz]

dam tim it made that kind of power an pump gas ? its out now.. i,ll need at least 10 an the jump ? 4 a wendys bigie combo ?

[BIGCOWL-IMP]

yup come on pm me well race when weather is nice

no thanks and thanks for the offer.

[quickstang1983]

hmmm maybe i need cars;-).........let me know when your ready.

You won't need anything for my slug! You can barely hear mine at an idle...:thumbsup:.

[BIGCOWL-IMP]

to many lol that race u were on motor?

Yes thats all motor........ i have no hose

[igotaneed4speed]

Ya thats me and ya who ever told you 800hp with a LSX block is full of it. You can clearly see its a aluminum block. I don`t think you can make 800hp with a hydrolic roller cam on 93 pump gas ?


Im sure its possible...

[HDHP]

Nice Notch. Looks fast just sitten there!!

[ls1sleeper]

no thanks and thanks for the offer.

why not?

[weryaat]

:gr_drivin

[BIGCOWL-IMP]

Thanks Steve