'03 Cobra motor + 93 Coupe = Not Dan's

[Rickety]

Workin on my project, unlike Dan.........

Few shots of some stuff I'm spending money on.....

Got a 3.4 Whipple ordered and on da way..... Prolly CNC the heads on this engine and throw some GT500 cams with the Whipple and the Kooks 1 7/8's Headers/X-Pipe.....

Thoughts of Mini Tubbin/25.5'n the car are entering my mind also....

Sorry for the crappy ass Camera Phone Pics....

[orangejuiced86]

very nice! 25.5 huh?? whats up with the cobra?

[Rickety]

On da back burner for now......

Gonna throw a 04 Mach 1 Engine in her to keep the Front End down......

Prolly go with a Aluminum Big bore Stroker with a 91mm in the Cobra when I'm done with the Notch....


Tryin to get a buddy of mine at FRPP to make a 03/04 Cobra Lower intake with a Ford GT/GT500 bolt pattern/port design.... :jawdrop2: We(Livernois)/Dave K got a killer port design on those heads...Just needs a 4.6 manifold to work....


I like these big bore 4.6 Combos.....Seem to make some steam...







very nice! 25.5 huh?? whats up with the cobra?

[xtremewheelz]

Have any pics of the rest of the car?

[OrangeF150]

Nice!:jawdrop2:

[Boost Creep]

nice

[Boost Creep]

I've seen it in person, and I think the Camera Phone makes it look better!

[cdz28]

looks good were gonna need some more pics!

[P.F.M.]

I've seen it in person, and I think the Camera Phone makes it look better!

HAhaha That is a fine 2nd post!! You will do just fine here at MM. ;)

[Boost Creep]

Guys like you are gonna make TREND resort back to glass block windows!
Sincerely,
PushRod Lover!

[NOBOOST]

I've seen it in person, and I think the Camera Phone makes it look better!

His phone must be a turd polisher.
http://i143.photobucket.com/albums/r141/samsam_049/GeeDubyaTurdPolish.jpg

[sidewayscoupe]

Must be nice to be made of money.

Ps. Thanks for calling me back.

[The Man]

BADASS fo' shizzle.

[Rickety]

Welp, the headers hit the pass side frame rail....Gonna give Kooks a call in the AM and see if they can make another one..............



:nopity:

[orangejuiced86]

screw that, it would be hammer time over here, lol

[dirtybird]

Get a torch you wuss ass :lol:

[P.F.M.]

Damn thats a bitch.....

[STOCK GT]

how much did you pay for the kooks?

[1BADAIR]

screw that, it would be hammer time over here, lol
yeah. start pounding out that frame rail





BTW ---Looks nice

[Fryguy302]

That's gonna be a bad mofo.

[Boost Creep]

I'm sorry, but I couldn't tell what I was looking at in those pictures. I thought for a minute that I was seeing a RED K-member? What up wit dat? Sweet headers though.

[Lunger]

Well i'm selling you out we all know this was your latest mod.

http://www.killerglass.com/store/images/SSR.jpg


yes yes glow worm rad hoses 50 +hp increase

[CMYZ28]

I've seen it in person, and I think the Camera Phone makes it look better!

DAMMNNNN, you found time to join us haha. 2 thumbs up to veal on tray for the honesty!!!!






This notch is gonna be a baddd bitch, and will be MINT when it's done lol

[Rickety]

Close to $1000....

Dat's why no hammer will be close to em....


:angel:


how much did you pay for the kooks?

[sidewayscoupe]

A great example of Redford player hate'n at its finest.

DAMMNNNN, you found time to join us haha. 2 thumbs up to veal on tray for the honesty!!!!






This notch is gonna be a baddd bitch, and will be MINT when it's done lol

[dirtybird]

And just like the Prodigal Son I've returned
Anyone stepping to me you'll get burned
Cause I got lyrics and you ain't got none
So if you come to battle bring a shotgun

[qwicklt1ws6]

badasss car

[Rickety]

LOL.......................



Thanks for all the kind words..............






And just like the Prodigal Son I've returned
Anyone stepping to me you'll get burned
Cause I got lyrics and you ain't got none
So if you come to battle bring a shotgun

[nuttsgt]

That thing outa be bad ass when done. I think I'd notch the frame rail.

[Termin8orFox]

Kooks are not cheap................... Looking good. It's Gettin there. My buddy Dennis here at work stopped by livernois and told me you were workin' on one. You will be pleasantly Suprised. It is fast as fuck in bone stock trim..........

Rudy

http://i140.photobucket.com/albums/r9/Rudy41432/car71507087.jpg

[CMYZ28]

i stuck my winky in the tailpipes earlier when saso wasn't looking, true story!!

[ASRoff]

i stuck my winky in the tailpipes earlier when saso wasn't looking, true story!!

I remember a certain video of you riding a header so this doesent suprise me.

[STOCK GT]

Couldnt you get Diamond Fab or someone to build you a set of headers for less?

[Rickety]

Dunno, never checked.....

I've put a bunch on cars without issues...I'm guessing the prodution tolerances on the older fox bodies are the culprit....





Couldnt you get Diamond Fab or someone to build you a set of headers for less?

[orangejuiced86]

maybe the car had been hit?

[91trunk]

By a train :roll: :roll:

[Rickety]

No Worries......Keep em commin while ya can.....


:whipped:


That little 4.6 is gonna put a hurtin on that Bennet built air pump....










By a train :roll: :roll:

[Rickety]

There were some issues with the front end....but, I don't think it was that major.....the other side is tight too(Like the pilot holes Stanford drills)......


:33:



maybe the car had been hit?

[orangejuiced86]

i judt notice on the k-member that it looks like a slotted hole and the bolt is all the way to the left which would mean the frame is inward.

[Rickety]

That's me tryin to "cheat" it over.....


i judt notice on the k-member that it looks like a slotted hole and the bolt is all the way to the left which would mean the frame is inward.

[P.F.M.]

By a train :roll: :roll:

DAMN!!! How can you talk to your one and only wrench like that???

[Termin8orFox]

Kooks are not cheap................... Looking good. It's Gettin there. My buddy Dennis here at work stopped by livernois and told me you were workin' on one. You will be pleasantly Suprised. It is fast as fuck in bone stock trim..........

Rudy

http://i140.photobucket.com/albums/r9/Rudy41432/car71507087.jpg

Hows it comin??


Rudy

[sidewayscoupe]

He is getting ready to buy some new wheels for this monster.

Ps. See my avatar
Pss. His will be gold

[P.F.M.]

He is getting ready to buy some new wheels for this monster.

Ps. See my avatar
Pss. His will be gold

Thoose are awesome. If I had the $$$ I would do it in a sec.

[STOCK GT]

He is getting ready to buy some new wheels for this monster.

Ps. See my avatar
Pss. His will be gold


Got more pics of those wheels?

[91trunk]

DAMN!!! How can you talk to your one and only wrench like that???

I know. I better be nice or he is gonna start tuning other peoples cars like yours did :D

[sidewayscoupe]

http://www.ponyr.com/

Got more pics of those wheels?

[The Man]

5.0 magazine just installed those on their feature car with a 315 rear tire. :drool:
<---- here are my 315's. :)

[Rickety]

Some Pics of the Whipple 3.4. Thumbs up to Livernois and Mike @ Whipple for the hook-up.............

[dirtybird]

That looks so lame :shake:
























:seizure: :thatshot: p.s. check rep :lol:

[1BADAIR]

3.4 means its supposed to be on a 3400

[ASRoff]

nice SASO!!!!!

[P.F.M.]

I know. I better be nice or he is gonna start tuning other peoples cars like yours did :D

Its not my fault the people want to get tuned by one of the BEST in the biz.

And dont you mean gonna start wrenching on others peoples cars? ;) Pinks all out is just around the corner Both of you have alot of work to do. So chop chop!!!

PS Thats a HUGE bitch Saso!!!

[soap]

Some Pics of the Whipple 3.4. Thumbs up to Livernois and Mike @ Whipple for the hook-up.............

Any reason you did not get the revised inlet??

--Joe

[sidewayscoupe]

Make sure you paint it grey so no one will know its a Kenny Bell ;-)

[char]

carefull, you will shoot your eye out with that thing... shivers gonna be one wild ride

[Rickety]

Yes, I didnt want the EGR crap......Mike was workin on one without it....He'll ship it when it's dunn.....


:thumbup:


Any reason you did not get the revised inlet??

--Joe

[Shadowfox]

Man that thinn is going to be sick! I think my car is just going to stay in the garage this summer !!!!


looks good man

[sidewayscoupe]

I am pretty sure that Sir Mix-a-lot is making a come back.

His first track is going to be about Saso.

Man that thinn is going to be sick! I think my car is just going to stay in the garage this summer !!!!


looks good man

[Venmous28]

why do you got the Intech coil covers, yo?

[Rickety]

eye like duh black covers.....

Plus, I use em for a conversation piece....


:specool:



why do you got the Intech coil covers, yo?

[2001-WS6]

eye like duh black covers.....

Plus, I use em for a conversation piece....


:specool:

Yep, that's his intro line at the bar...

"Yo baby... do you want to see my covers???" :D

Rick

[Venmous28]

hahah.. i can see it now..

[Crazzy_Al]

InTech 32v? You pulled that out of a Mark VIII?

[orangejuiced86]

InTech 32v? You pulled that out of a Mark VIII?

just the valve covers.

[Crazzy_Al]

just the valve covers.

I see. I figured that was the most logical answer, but I had to ask anyway.

[Rickety]

Some pics of the PonyR Wheels and the 315's(Thanks "The Man").......

[CMYZ28]

Badass! Those look like steam rollers!

[notchrocket]

I love this car :drool:

[Im2slow]

its a nice one

[The Man]

looks sick, those look alot better on those than they did on my 9" wheel. Fuckin awesome Sash. :drool:

are those runflats?

[sidewayscoupe]

Sell it.

[The Man]

Sell it to me. :)

[P.F.M.]

man I hate you!!!!!!!!!!!!!! thoose look badazz again....

Now bring them over here so I can test them for ya...;)

[Rickety]

Yep...Day iz Run-Flats....

SIKE!!!!!!!!!!

PFM, Chrome Wheels on a Black Notch...... It's like hand lotion without the bottle....


:thumbup:

[orangejuiced86]

Looks great!!

[Rickety]

Dankz for da kind words................


:cheers:

[ASRoff]

Nice set of Shoes Saso!

[Shadowfox]

I told you they will fit! They look sick to sash.

[Rickety]

Got the Fronts back from Weldcraft.......Sweet Job........Put some M&H's on....

The front wheels started out at 6.75 inches....James(Weldcraft) got em down to 5 inches.....

Tires are M&H 185/55/17.

[Rickety]

Got one of the GT Heads CNC'd here at work.....

The heads flow 375 and 280 @.050 after the CNC.....

[orangejuiced86]

Very nice!! Do you have any pics of the complete car?? Or just these damn teaser shots..

[Crazzy_Al]

Not gonna lie, fat and skinny ponies are a dope idea!

[Boost Creep]

Tight!

[sidewayscoupe]

Spoonie love from up above.

Tight!

[1BADAIR]

sum ting rong wit the phender

[Crazzy_Al]

sum ting rong wit the phender

I too was wondering why the fender didn't line up with the door.

[jtcstrat]

BadA$$!!

[orangejuiced86]

As many times as he has had the car apart, the fender is probably just barely bolted on.

[Rickety]

Dat is corrtect.......

Still have to plumb the cooler lines....


As many times as he has had the car apart, the fender is probably just barely bolted on.

[4v Shane]

Slow

:hmm:

[Rickety]

Some pics of a certain Al 5.4 Block being opened up for sleeves.. 94mm slugs will be used..........

[1BADAIR]

dang. you must stack mad paper

[Rickety]

Yep....

My "Garden Tools" do all the work though..........

:pimp2:



dang. you must stack mad paper

[Crazzy_Al]

From that angle those cylinder walls look paper thin between the pistons. :eek:

[Rickety]

The production ones were "bored out" and Darton Sleeves are going in.....


Prodution bore size is 91mm and the Darton's will be 94mm....





From that angle those cylinder walls look paper thin between the pistons. :eek:

[The Man]

just sick.

:seizure:

[Crazzy_Al]

The production ones were "bored out" and Darton Sleeves are going in.....


Prodution bore size is 91mm and the Darton's will be 94mm....

I didn't even read the 1st part of the post with the pix where you mentioned you were putting sleeves in it. :shake:

[Venmous28]

tis a sweet ride..

[GBodyGMachine]

Dont you have this thing done yet? Whats the hold up?
Jeff

[STOCK GT]

you going 5.4 now?

[Rickety]

I'm going as quick as I can......



No, the 5.4 is for the Cobra....


:blaster:



Dont you have this thing done yet? Whats the hold up?
Jeff

[the doctor]

THATS GONNA BE COOL WHEN ITS DONE

[Crazzy_Al]

THATS GONNA BE COOL WHEN ITS DONE

As long as he doesn't run it into any more car lifts. :D

[Rickety]

DAMN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


:flashboob





As long as he doesn't run it into any more car lifts. :D

[1BADAIR]

convertor was too tight

[Jasper302]

DAMN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


:flashboob

I would just light it on fire and be done with it. That sucks, sorry to see it like that.

[Crazzy_Al]

I would just light it on fire and be done with it. That sucks, sorry to see it like that.

Just a drop in the bucket for Saso. :D :spend:

[sidewayscoupe]

x2 That sucks, but I know you will fix her up good as new.

DAMN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


:flashboob

[orangejuiced86]

Ahh, now I see why you were looking for a rear end housing.. How did that happen?

[Crazzy_Al]

Ahh, now I see why you were looking for a rear end housing.. How did that happen?

Car cannot be started with a key yet.
Car is an auto.
Saso looked inside the car and it looked as if the car was in PARK...it was actually in REVERSE.
He turned the car over (I forgot what method he used to turn the car on)
The car took off in reverse (again, it was in gear) and smacked one of the hoist poles.

Could have happened to anyone. Just shit luck that day.

[orangejuiced86]

Man, that sounds like something that would happen to me.

[STOCK GT]

Car cannot be started with a key yet.
Car is an auto.
Saso looked inside the car and it looked as if the car was in PARK...it was actually in REVERSE.
He turned the car over (I forgot what method he used to turn the car on)
The car took off in reverse (again, it was in gear) and smacked one of the hoist poles.

Could have happened to anyone. Just shit luck that day.


Same thing happend to me...
Now I always make sure the handbrake is up when working on it

[steve581581]

Car cannot be started with a key yet.
Car is an auto.
Saso looked inside the car and it looked as if the car was in PARK...it was actually in REVERSE.
He turned the car over (I forgot what method he used to turn the car on)
The car took off in reverse (again, it was in gear) and smacked one of the hoist poles.

Could have happened to anyone. Just shit luck that day.

haha... i did the same thing once... damn near ran over a friend of mine... i couldnt stop laughing for ten minutes... sucks you hit something a little more solid than a friend

[GBodyGMachine]

Car cannot be started with a key yet.

He turned the car over (I forgot what method he used to turn the car on)



OOOOOOOO, I want to say it, But I'll let Saso.

I can imagine the look on your face when the car took off. Did you wave? :wavey:
Sorry man. Hope you get it fixed soon.

[1BADAIR]

no wave
he said " see you monday"

[91trunk]

DAMN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


:flashboob

I'll admit it. I teared up alittle when I got the text. :( I know Sideshow will make it perfect AGAIN, but that's just shitty luck.

On a brighter note the engine swap and his attention to detail is second to none! If you look under the hood it's like Ford built it.

[Rickety]

Thanks for the kind words....It was my own dumbass mistake....

I've got another 8.8 being built....She's goin in next week..Throw her on the dyno/tune her/run her.....

It'll bug me to drive it all "J'd" up, but hey...........



:slomo:

[P.F.M.]

I puked in my mouth when I got the text.

[ASRoff]

Thanks for the kind words....It was my own dumbass mistake....

I've got another 8.8 being built....She's goin in next week..Throw her on the dyno/tune her/run her.....

It'll bug me to drive it all "J'd" up, but hey...........



:slomo:

So She is getting close huh? thats awesome!

Hey I know a body shop not to take it too........:bondage::redstang:

[Venmous28]

sucks you hit something a little more solid than a friend


:lol: :roll:

thats funny!

[sidewayscoupe]

Get it on the rollers yet?

[Venmous28]

get that PM Dan?

[sidewayscoupe]

Shit, now I know why I felt like I was forgetting something! Hang tite PM coming.

get that PM Dan?

[Venmous28]

no problem.. thanks again.

[TwilightBlu92]

I would just light it on fire and be done with it. That sucks, sorry to see it like that.

Don't say that.

[Crazzy_Al]

Don't say that.

:lol:

[Termin8orFox]

Thanks for the kind words....It was my own dumbass mistake....

I've got another 8.8 being built....She's goin in next week..Throw her on the dyno/tune her/run her.....

It'll bug me to drive it all "J'd" up, but hey...........



:slomo:


Its all worth it once you drive it.... It has a totally different sound than any other mustang you have rode in.... Throttle response is flatout SICK.... Never seen anything like it.

Rudy