N/A 7.3 to Powerstroke

[a383z28]

Hey guys I am putting a powerstroke in one of our roll off trucks that had a 7.3 N/A motor in it. The trans was a spicer 5 speed. A guy put a 6.9 ford motor in it and didn't get the motor wired right and didn't run the best. I spent a week re working this and geting all the wires mated to the International body. The truck is a 91 International 4600. I have been taking pictures as I go just to keep. I have a lot of computer electrical work as soon as the fab work is done. Thanks for looking. Let me know what you think and/or what you think. I always need ideas.

[a383z28]

pictures are to big......:confused:

[a383z28]

Can i email them to someone that knows how to make them fit?

[Fryguy302]

Yes, you can send them to me at fryguy302@gmail.com, I'll resize them for you.

[a383z28]

ok thank you..I will

[The Big Cheese]

Windows Imagine Resizer

http://download.microsoft.com/download/whistler/Install/2/WXP/EN-US/PowerCalcPowertoySetup.exe (http://download.microsoft.com/download/whistler/Install/2/WXP/EN-US/PowerCalcPowertoySetup.exe)

[a383z28]

ok sweet....I'll see what happens. Thank you.

[a383z28]

pictures sent.

[Fryguy302]

http://motownmuscle.com/forums/files/51480f37cda1211.jpg

http://motownmuscle.com/forums/files/51480f37cdc4822.jpg

http://motownmuscle.com/forums/files/51480f37cd68fb5.jpg

http://motownmuscle.com/forums/files/51480f37ce166fb.jpg

http://motownmuscle.com/forums/files/51480f37cde6333.jpg

http://motownmuscle.com/forums/files/51480f37f2a0292.jpg

http://motownmuscle.com/forums/files/51480f37f2c1da2.jpg

http://motownmuscle.com/forums/files/51480f37f2e252b.jpg

http://motownmuscle.com/forums/files/51480f37f30ee5b.jpg

http://motownmuscle.com/forums/files/51480f37f32fdb2.jpg

[a383z28]

Thank you for posting those for me! They turned out real good except for the last one..

[a383z28]

did you get the newest pictures I sent you?

[Fryguy302]

http://motownmuscle.com/forums/files/514820aac3270c2.jpg

http://motownmuscle.com/forums/files/514820aac37e262.jpg

http://motownmuscle.com/forums/files/514820aac3d0ab2.jpg

Nice work. Are you a fabricator by trade?

[a383z28]

Thank you! I like to do this kinda of work when I have the chance. I really like to fab stuff like this and make it look good and work. I ended up making an entire K member with top brackets that go over the frame rail and bolt. I just painted it today. I took a bunch of pictures of the progress. I was suprised when I bolted the motor down on the mounts, how heavy a powerstroke engine and trans weighed. So I put it on a grain scale and it pegged the 1800lb mark. So I had to make more braces and it came out great! I shocked myself when I looked at it all done. Can you post up the last pictures for me? Thank you for helping me out with the pictures and thanks for the comments!

[Fryguy302]

http://motownmuscle.com/forums/files/514826e92f70f16.jpg

http://motownmuscle.com/forums/files/514826e93031776.jpg

http://motownmuscle.com/forums/files/514826e92fcc01e.jpg

[a383z28]

thanks!

[juicedz]

Looks good Andy, keep up the awesome work!

[a383z28]

I started to wire this this today.....yuck!