PDA

View Full Version : looking for answers about a mustang..


MikeyJ12
09-03-2008, 06:25 PM
I got a 1990 GT, it's all stock.. i'm looking to get some new exhaust on it, i want it to be loud, but i have no idea what i should get.. any feedback wud be great..

aimmotorsports
09-03-2008, 09:21 PM
i have a flowmaster cat back with 2.5" stainless pipes and a bbk h pipe the would work for ya if your intrested... $250 for both.

igotaneed4speed
09-03-2008, 09:42 PM
if you have a saw-z-all just crawl under it and start cutting the exhaust up it'll get loud then. sound like your at a NNNNNNNNNNNNNNNNNNNNAscar event with all them super duper cars going in circle son the roundyboutamatrack

supernotch90
09-03-2008, 09:51 PM
some full length headers bbk x pipe with flows dumped all 2.5 in would be a great sounding set up for that car the u might want the k&n and pullys and that is where it starts.

igotaneed4speed
09-03-2008, 09:54 PM
if you want to be cheap and it sound good.

find some used full lengths prob get a nice set for 150 bucks

pick up a summit or jegs 100 dollar universal x pipe.. with a lil fitting they fit titties under a fox.

pick up some band clamps and flanges for the headers to x-pipe

then pick mufflers of choice with some dumps

i would use a dynomax personally.

you might 400 or alil more into but i'll sound good.

MikeyJ12
09-04-2008, 11:14 AM
I checked out the BBK x pipes, i have the option to buy with or w/o cats on it, is it better to have over the other?

MikeyJ12
09-04-2008, 11:17 AM
I meant " is one better than the other"? or is it just preferance? i want peeps to hear me comin.. lol

89five.o
09-04-2008, 11:51 AM
Click here to watch FRPPheadersdrgaxorxBassanicat (http://media.putfile.com/FRPPheadersdrgaxorxBassanicat)

Here's my exhaust. Sorry I don't have any driving shots of it. I have FRPP Jet Hot coated headers, a Dr. Gas o/r x-pipe and a bassani quiet thunder 2 1/2" catback. Its fairly quiet when cruising but sounds mean when you lay on it. Oh, and sorry it was a bit windy out.

MikeyJ12
09-04-2008, 12:14 PM
Where did ya get ur headlights from? and ur car does sound nice! thanks for the video

89five.o
09-04-2008, 02:36 PM
Thanks. I purchased the headlights online off of ebay but I'm pretty sure you can get them from www.50resto.com which by far has been my favorite site to order mustang parts from.

MikeyJ12
09-04-2008, 05:59 PM
Well thanks for all the input, it's been helpful

foxbodydave
09-04-2008, 06:01 PM
im running long tubes with 10 series outlaw flowmasters, its definetly loud

YouTube - mustang with 10 series flows

prostreet377
09-04-2008, 06:51 PM
PM sent

Tom

quickstang1983
09-05-2008, 02:53 PM
I have 1 3/4 longtubes and I welded on 2 1/2 inch ball flange connectors on 3 inch straight pipe back to 1 chamber flows dumped. It is loud but not annoying. Sounds like a big block actually. Not sure how loud you want it but bullets are probably the loudest. I had them right off the collectors.

MikeyJ12
09-05-2008, 06:50 PM
Thanks alot guys, i think i know what imma get.. But i do have a couple other questions, i'd like to get a new throttle body and cold air intake.. is the 70mm throttle body gonna work well with my stock 5.0 or should i get a bigger one? and, is does BBK cold air intake do the trick? or is it best to stick with the K&N?

aimmotorsports
09-05-2008, 06:53 PM
i'de do a mass-air sensor first. the stock one is actualy smaller than the stock tb.

jordanbmx
09-06-2008, 02:07 AM
1 3/4 mac long tubes 3 inch x pipe and 3 inch bullets
http://i93.photobucket.com/albums/l46/jordanbmx_2006/th_100_0147.jpg (http://s93.photobucket.com/albums/l46/jordanbmx_2006/?action=view&current=100_0147.flv)

Detroit Style Dragger
09-06-2008, 02:23 AM
BBK equal length shorties, x-pipe, flowmasters.
YouTube - New car idle

YouTube - Walk around

MikeyJ12
09-06-2008, 10:10 AM
[QUOTE=Detroit Style Dragger;1316790]BBK equal length shorties, x-pipe, flowmasters.]


That thing sounds nice, what size cowl hood you got on that thing?

aimmotorsports
09-06-2008, 12:57 PM
its a 4"

Detroit Style Dragger
09-06-2008, 01:15 PM
its a 4"
3.945" Actually.:lo:

Anyone here willing to axe the piping on my car? I want the pipe post muffler taken off.

aimmotorsports
09-06-2008, 02:11 PM
just let me know...

69C20
09-06-2008, 03:31 PM
if you have a saw-z-all just crawl under it and start cutting the exhaust up it'll get loud then. sound like your at a NNNNNNNNNNNNNNNNNNNNAscar event with all them super duper cars going in circle son the roundyboutamatrack

hahaha
:roll:

85capri
09-07-2008, 07:15 PM
dynamax bullits enuff said i have them and they stop in the middle of the door and its plenty loud enuff

The Man
09-07-2008, 10:06 PM
here you go: http://www.motownmuscle.com/forums/showthread.php?t=77293

Shadowfox
09-12-2008, 11:34 AM
http://i107.photobucket.com/albums/m299/Viper_Dreams/IMG_0962.jpg


http://i107.photobucket.com/albums/m299/Viper_Dreams/my%20vids/th_nightidle.jpg (http://s107.photobucket.com/albums/m299/Viper_Dreams/my%20vids/?action=view&current=nightidle.flv)

SVT32VDOHC
09-16-2008, 01:57 PM
Stock headers, 2.5 offroad H-pipe and a MAC catback! My cars are both loud with those things!!!

controlled insanity
09-17-2008, 12:44 AM
cherry bomb!!

Fryguy302
09-17-2008, 09:57 AM
http://detroitracing.net/forums/showthread.php?t=6216

Headers and complete exhaust for $200, can't beat it :)