Install Mustang-II, advice?

I have a must II IFS I am tacking in and I am thinking about putting a 1 to 2in drop, maybey! My question is To keep it stock I will weld my spring towers on top of my frame rail. If I drop my spring towers say 1 inch below the top of frame rail, which will drop it 1 inch, will I have to drop my must II crossmember also because it seems like my springs might get pretty tight, or off wack not sure, advise, thanks, Dana

Quote:

---

Originally Posted by 39chevy

I have a must II IFS I am tacking in and I am thinking about putting a 1 to 2in drop, maybey! My question is To keep it stock I will weld my spring towers on top of my frame rail. If I drop my spring towers say 1 inch below the top of frame rail, which will drop it 1 inch, will I have to drop my must II crossmember also because it seems like my springs might get pretty tight, or off wack not sure, advise, thanks, Dana

---

dont drop the upper shock tower, depends on who's kit you use, but i would put the xmember in and use dropped spindles. i sell and install Heidt's products, let me know if i can help. Todd