Chassis paint q's

I have two cars down to the frame and want to paint all the chassis black parts in one session- (2) frames, (2) rear axles, (2) driveshafts, two cars worth of misc small brackets, bits, and doo-dads.
I have Devilbiss' 2-gun Startingline kit- which I've never used. I desire an American OEM sheen for all parts. I also want the topcoat to be UV protected. All parts will have rust removed by wire-wheel/bristle disc/sandpaper/wipe-on chemical processes- I really should have ponied up for dipping/blasting.

One car is an early '60s full-size Ford (chassis is ~13' x 4' box) the other is a mid-'60s Morgan (chassis is ~10' x 3' 'S' shaped sheetmetal). Both cars will be driven (fairweather only) so the finish must be durable.

Now, for the Qs. . .

What's your preferred product for this application? primer & topcoat or a directly on metal paint?
Which product do you recommend for the painting newb and my equipment?
Would a gallon of paint be enough for both projects?


Just getting a bit lost in Chassis Saver, POR, DP90, John Deere Blitz Black, Eastwood, etc. . . information.

Quote:

---

Originally Posted by DoubleC

I have two cars down to the frame and want to paint all the chassis black parts in one session- (2) frames, (2) rear axles, (2) driveshafts, two cars worth of misc small brackets, bits, and doo-dads.
I have Devilbiss' 2-gun Startingline kit- which I've never used. I desire an American OEM sheen for all parts. I also want the topcoat to be UV protected. All parts will have rust removed by wire-wheel/bristle disc/sandpaper/wipe-on chemical processes- I really should have ponied up for dipping/blasting.

One car is an early '60s full-size Ford (chassis is ~13' x 4' box) the other is a mid-'60s Morgan (chassis is ~10' x 3' 'S' shaped sheetmetal). Both cars will be driven (fairweather only) so the finish must be durable.

Now, for the Qs. . .

What's your preferred product for this application? primer & topcoat or a directly on metal paint?
Which product do you recommend for the painting newb and my equipment?
Would a gallon of paint be enough for both projects?


Just getting a bit lost in Chassis Saver, POR, DP90, John Deere Blitz Black, Eastwood, etc. . . information.

---

A gallon might do it depending on coats and mixing.

I've never heard a bad thing about the POR stuff.

POR is nice, goes on nicely with the right mix.equipment. you can get it in different colors/finishes, and is verydurable. I have it on teh underside and underhood of my car, and in 6 years of owning it (was on long before i baught teh car) it hasn't faded or peeled and is hard to chip/scratch. If you're downriver painters supply carries it i believe on fort by southfield.

Flat Rock Automotive carries it as well. We just picked some up yesterday afternoon.

Mullins (NAPA) in Milan stocks POR, too. I've brushed it on Jeep frames before but haven't sprayed it. I'd like to know which other brands people prefer.

Quote:

---

Originally Posted by red347lx

Flat Rock Automotive carries it as well. We just picked some up yesterday afternoon.

---

I was there earlier this week and asked about the stuff, was suprised to hear they still sold stuff like this!

That store is the BEST around here for anything Automotive! No kids behind the counter asking what color your car is and what not.

Quote:

---

Originally Posted by Duke

I was there earlier this week and asked about the stuff, was suprised to hear they still sold stuff like this!

---

POR15 works great and has a VERY high gloss but is not UV friendly. You said you wanted UV protection, so you will have to prime, and paint the parts that will be exposed to the sun. POR15 or Chassis Saver will be excellent for the axles and frames and things under the car. I haven't used Chassis Saver, maybe someone else can chime in if that product is UV safe. POR15 is designed to adhere to rust, and I've noticed it doesn't stick too great to bare metal. I tested a few peices I had laying around and when it's over rust, it won't come off, but over bare metal, I scraped it off with a screwdriver.

I had a frame powdercoated for 300.00 done in under 24 hours

E-Coating is very nice there is a place in Romulus that does it.
http://redi-coat.com/ecoating.html
Attachment 53558

Quote:

---

Originally Posted by THOR84GT

E-Coating is very nice there is a place in Romulus that does it.
http://redi-coat.com/ecoating.html
Attachment 53558

---

Wow - from their site!

Body 13’-6” $2500.00 Body over 13’-6” Call

Quote:

---

Originally Posted by THOR84GT

E-Coating is very nice there is a place in Romulus that does it.
http://redi-coat.com/ecoating.html
Attachment 53558

---

provided they dont fuck up your shit twice then tell ya "sucks to be you"


and they dont do the coating there they send it to Indiana they just acid dip

Quote:

---

Originally Posted by moneypit

provided they dont fuck up your shit twice then tell ya "sucks to be you"


and they dont do the coating there they send it to Indiana they just acid dip

---

I never used them just looked like it would be very nice done that way

I'd like to know what the "rust inhibitor" is, they mention nothing about phosphate

I have used both POR15 and Chassissaver with a brush. The POR was a better choice for me and seems more durable. I painted my utility trailer with POR 5 years ago it was rusty as heck and I use it year round and it still looks great even with all the salt spray in the winter.