Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: NEED HELP HOOKING UP!!!

  1. #1
    Club Member red347lx's Avatar
    Join Date
    Jun 2007
    Location
    Carleton
    Posts
    4,903

    Default NEED HELP HOOKING UP!!!

    I HAVE AN 89 MUSTANG WITH A 347 IN IT HOOKED UP TO TH400. ALL NEW UPR SUSPENSION INCLUDING ANTI ROLL BAR, UPPER/LOWER ADJ. CONTROL ARMS, TORQUE BOXES ARE WELDED. PROBLEM IS I GET ON THE TRANS BRAKE AND LET IT LOOSE AND IT SMOKES THE TIRES BAD! I AM NOT A GENIUS ON SUSPENSION ADJUSTING. NEED ADVISE ON WHAT I CAN DO TO IMPROVE TIMES. TIRES ARE 27.5X10.5 PRESSURE AT 18LBS THANKS IN ADVANCE FOR SUGGESTIONS NATE

  2. #2
    Club Sponsor
    Join Date
    Apr 2004
    Location
    SE michigan
    Posts
    2,577

    Default

    Who installed and set up the suspension? what's the pinion angle at?
    do you have a good guess at the weight of the car?

    need to know a few things befor I can help!
    "You didn't Build it" LMFAO isn't that what Oboma said too?

  3. #3

    Default

    Slick, et street, drag radial? Adjustable struts?

  4. #4
    Club Member Performance Red Dale's Avatar
    Join Date
    Jun 2004
    Location
    Shopping at Wal-mart and engaging capitalism
    Posts
    3,374

    Default

    I run my car at 11lbs of pressure on a similarly sized ET Street, 18 is way to much pressure I think.
    "John McCain was killing communists while Barrack Obama was taking reading lessons from them" - Mark Levin

  5. #5
    Club Member LITTLEMAGS's Avatar
    Join Date
    Jun 2005
    Posts
    4,219

    Default

    dave is right...you need to specify a lot more specifics before a good guess can be given.

  6. #6
    Club Member red347lx's Avatar
    Join Date
    Jun 2007
    Location
    Carleton
    Posts
    4,903

    Default

    Street Legal Motorsports set up the suspension. They are going to adjust it hopefully Weddnesday at tnt at milan, but i was hoping to gegt it better for this weekend for the time being. I believe the pinion angle is at stock level. weght of the car is probably around 3000lbs(guessing). thanks for your help

  7. #7
    Club Sponsor
    Join Date
    Apr 2004
    Location
    SE michigan
    Posts
    2,577

    Default

    bring it by if you need it done sooner
    Last edited by Team Z Motorsports; 05-30-2008 at 01:01 PM.
    "You didn't Build it" LMFAO isn't that what Oboma said too?

  8. #8
    Club Member red347lx's Avatar
    Join Date
    Jun 2007
    Location
    Carleton
    Posts
    4,903

    Default

    LOCATION?

  9. #9
    Club Member 91Mustang's Avatar
    Join Date
    Oct 2006
    Location
    Downriver
    Posts
    1,397

    Default

    From the website:

    Team Z Motorsports is located at 27900 Hall Road in Flatrock, Michigan. You may stop by and visit the shop during normal business hours Monday through Friday. Use the map below for directions to Team Z.

    E-mail Team Z Motorsports @ TeamZMotorsports@sbcglobal.net.

    You may also call the shop at (734) 789-9540. If we don't answer, please leave a message. We're probably busy working on someone's project and will get back to you as soon as possible.

  10. #10
    Club Member red347lx's Avatar
    Join Date
    Jun 2007
    Location
    Carleton
    Posts
    4,903

    Default

    TEAM Z, I WENT BY YOUR PLACE TODAY TO TALK TO YOU ABOUT MY CAR, BUT NO ONE WAS THERE. CALL ME THURSDAY IF YOU ARENT BUSY AND I WOULD LIKE TO TALK TO YOU ABOUT DOING SOME STUFF FOR ME. POSSIBLY A CUSTOM CROSSMEMBER FOR A TH400 APPLICATION AND ALSO SOME OTHER ITEMS OF INTEREST. THANKS 734 341 2210 NATE

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •