Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Control arms

  1. #1
    Club Member 5.0kid's Avatar
    Join Date
    Feb 2007
    Location
    Nashville Tn/ original motorcity guy
    Posts
    795

    Default Control arms

    Just want to know what kind of rear upper and lower control arms you guys are using on your fox bodied stangs, and what kind you recommend for street-strip use

  2. #2
    Club Member black88coupe's Avatar
    Join Date
    Feb 2005
    Location
    YES my shit is slow and NO you can't drive it!
    Posts
    6,886

    Default

    Team Z. Great products + club sponsor.

    Did the wizard ever get back to you about that brain?????

  3. #3
    Forum Member Pwraddr's Avatar
    Join Date
    Jan 2008
    Location
    Metro Detroit
    Posts
    3,268

    Default

    Wolfe team z are a couple I have uppers and lowers for sale check the sale section

  4. #4
    Club Member black88coupe's Avatar
    Join Date
    Feb 2005
    Location
    YES my shit is slow and NO you can't drive it!
    Posts
    6,886

    Default

    looks like your new here. details on your car would help too.

    Did the wizard ever get back to you about that brain?????

  5. #5
    Club Member 1badford's Avatar
    Join Date
    Oct 2007
    Posts
    4,038

    Default

    x2
    Quote Originally Posted by black88coupe View Post
    Team Z. Great products + club sponsor.
    trust me its slow

  6. #6
    Club Member 5.0kid's Avatar
    Join Date
    Feb 2007
    Location
    Nashville Tn/ original motorcity guy
    Posts
    795

    Default

    Yeah I have been here since 07 but read alot of post and answer most of my own questions there but my car is notchback with a 359na efi windsor and t5 with a 8.8 im running drag radials at 265-60r15 but even after a good burnout and only 14-15psi in the tires i either get wheel hop or spin most of the time i also have a set of eibach sportline springs i wasnt sure if i could get a ok ride out of dragsprings on the little bit of street time it does see so thats the reason i went with the sportlines i got the rearend pulled right now for a gear swap and i plan on welding in battle boxes so why not add some control arms

  7. #7
    Club Member black88coupe's Avatar
    Join Date
    Feb 2005
    Location
    YES my shit is slow and NO you can't drive it!
    Posts
    6,886

    Default

    Sounds fun!

    Did the wizard ever get back to you about that brain?????

  8. #8
    Club Member black88coupe's Avatar
    Join Date
    Feb 2005
    Location
    YES my shit is slow and NO you can't drive it!
    Posts
    6,886

    Default

    i think i ran my DRs as low as 11psi and it only ran 12.60's.

    Did the wizard ever get back to you about that brain?????

  9. #9
    Club Member 5.0kid's Avatar
    Join Date
    Feb 2007
    Location
    Nashville Tn/ original motorcity guy
    Posts
    795

    Default

    ok yea Im living in tennessee now and they only run 1/8th mile down here so gears are a must no more 3.08's

  10. #10
    Club Member Fordguy's Avatar
    Join Date
    Oct 2007
    Location
    Canton
    Posts
    268

    Default

    I run Team Z relocated double adj. uppers and single adj. lowers.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •