Fox body front coil removal?

[chuck-norris]

So I have almost everything to put my tubular k member and coil overs but I can't figure out how to compress the springs none of the coil spring compressors at the parts stores work and I can't do the hold it up with the jack and unbolt it because there is no weight on the front of the car the springs where on full droop when it was on the ground. What should I do?

[mikesfastss]

cut with a torch,be careful dont stand in front of it

[chuck-norris]

cut with a torch,be careful dont stand in front of it

Damn near the only thing I don't have access to.

[2094you]

did u drop the strut .i undid mine and pushed the spring out with a pole . well it shot out like a bad out of hell so be carefull

[mikesfastss]

did u drop the strut .i undid mine and pushed the spring out with a pole . well it shot out like a bad out of hell so be carefull

good ideal you can also tie something to the spring to control it while your removing it

[2094you]

i have heard stories of those fuckers hurting people

good ideal you can also tie something to the spring to control it while your removing it

[chuck-norris]

i have heard stories of those fuckers hurting people

They kill..

[Justindwright]

can't you drop the k-member down with the springs/control arms still in place?

[chuck-norris]

Not without the springs flying out

[93notch408]

i used chains to chain my front springs to the k member so they dnt go flying its easy to do