roll cage

[notch92408]

i have a 6 point in my car now and i have the bars to make it a 10 point i have windshield out dash and seats what would somebody usually charge for this and who would do it on spare time thanks if intrested pm me a price and about how long thank you!!!

[red347lx]

cm or ms?

[notch92408]

sorry i wanna say mild steel

[red347lx]

do it yourself

[notch92408]

dont know how to cut bars to fit

[Billydroveit]

dont know how to cut bars to fit

Angle grinder, course flap/sanding disc on grinder. I use a saw zall and get it to the general length, then grind the shape into the bar to mate up with teh bar it's going to be welded to. Done about 7 cars this way no issues. Takes a little practice, but once you get it it'seasy. They have those tube notch guides you can also buy from summit/jegs. If you can weld the rest is easy.

Few example pics. This was my car.

[deputydog]

Here is pic of my work, a 25.5 S10 that will run Milans all motor class, done a quite few 25.2 & 25.3 cars also, Everything I do is CM and custom bent in case something you have doesnt fit good enough. Ill send you a PM with a price....couldnt get the picture to post without a link.

[87stang]

S&W makes a nice fit cage threw or around the dash. Wolfe makes a really nice cage as well. Just what you want to spend. And if you need any help let me know have done 5 cages.

[cobra tom]

i have a 6 to 10 point add on kit sitting in my garage collecting dust. its ms and is for 87 thru 93 - 50.00 come get it

[BIGCOWL-IMP]

PM this guy he did my cage and the price was right plus he did a excellent job..... Bad466