Originally Posted by
mikebos99
Selling some parts that have been sitting was going to use them again but decided to change set ups.
have for sale a set of Victor Glidden sbf heads originally done by Cary when he was at et heads. They were freshened by roush over last winter and never used since. The chambers are 58cc. 2.185 titanium intake valves 1.57 stainless exhaust valves. 265 cc intake port 85cc exhaust port 110 cc with the exhaust port extensions. 1248 PSI valve springs. I do not have flow numbers on these heads. When they were at Roush Ron there said they would be close to 400 on the intake. include the port extensions/header adapters
the intake is a custom casted intake made for a 9.2 deck. 4500 flange and has two sets of nitrous bungs. also have the valley tray to go with it.
Jesel shaft mount rockers for these heads one piece mounts. both the intake and exhaust at 1.8 ratio. have a spare rocker for both intake and exhaust.
2 1/8-2 1/4- 4 inch headers. Used on 9.5 deck with front and mid plate standard location down and back.
Motorsports valve covers one has 12 an fitting welded on for vaccine pump.
arp head studs
$4000 heads rockers intake headers head studs valve covers.
Romac sfi neutral balancer. It's sfi approved but the sticker fell off still has it stamped in though. $125
meziere electric water pump blue anodized. Comes with the plate and a fittings for a hose or 20an fitting. $150
Hvh super sucker 4500 spacer. One is 1 inch other is 2 inch. $50 each
Danny be belt drive comes with roller Torrington bearing $550
Lunati forged 3.75 stroke crank 2.750mains 2.100 rods. Broke a lifter when running this
Crank there is some marks on it from the lifter hitting it. $400
Nos bottle heater. $30
1 fogger plus 8 jets of each from .020-.036. Has annular style nozzles. All parts origanly from induction solutions. Has two 6 an lines into a 6an Y. $500
Fuel log with one magnafuel ragulator and two Holley 803 regulators and all fittings in and out. 10an into log 8an out on magnafuel 6 an out on holleys. Fuel log is home made but it works. $150
Shower head with 6an fittings in and out. $30
6 an feed line with edelbrock purge solinoid 1/4 turn valve and a 4 inch gauge on it 90 inches long all together. $125
Manga fuel 500 pump with two magnafuel inline filters. $250
Pro systems nitrous pro-IV 1150 dominator. $600
Two brand new speed tech 10lbs nitrous bottles. $160 each
Nos 10lbs bottle used. $100
Nos 20lbs bottle still full. $130
15x12 pro stars 5x4.5 bolt pattern 6.5 back spacing. Have 29.5x10.5 m/t mounted on them. $300
Msd 7555 to use individual cylinder timing with 7531 box. $50
Msd sbf crank trigger. $120
Msd 9.2 deck distributor for use with crank trigger. $120
All parts are used unless noted.
Might be adding more stuff as I find it
Have pictures and will add them later when I get to a computer or can email or text pictures right now. Can reach me at 810-824-0944
Bookmarks