be careful with that dash, crack free 91-93 dash boards are hard to find
be careful with that dash, crack free 91-93 dash boards are hard to find
My buddy has some ART arms , coil overs blah blah for one if you are interested I can give you his digits
02 s10 layn body on 22s , backhalfed
1991 syclone ls swapped 85mm turbo awd
83 c10 ls swapped
66 mercury coyote swapped
Money pit, this dash actually isn't what I want anyways. I want the unicorn 82-85/6 dash. But if I can't find one this one will go back in.
Sent from an unknown location using Tapatalk
-Ryan-
91 Slow'noma - 14 Cruze Diesel - 16 Ram 1500 Limited
16 KTM 1290 SuperDuke R - 18 GasGas TXT300GP
Laynplztic, very possible I'll pm you my number if you want to pass it along.
Sent from an unknown location using Tapatalk
-Ryan-
91 Slow'noma - 14 Cruze Diesel - 16 Ram 1500 Limited
16 KTM 1290 SuperDuke R - 18 GasGas TXT300GP
I wonder if a T Bird IRS will fit under it?
if your trying to make it handle
and I just happen to know where one is
I have a no vent dash wrapped up in my attic. Hard to find them!
02 s10 layn body on 22s , backhalfed
1991 syclone ls swapped 85mm turbo awd
83 c10 ls swapped
66 mercury coyote swapped
Current dash is charcoal gray. No cracks at all that I remember. I do know that the back side of the storage cubby down below the glove box is all cut/broken from previous modifications. I'll try to get pictures of it when I get home.
Sent from an unknown location using Tapatalk
-Ryan-
91 Slow'noma - 14 Cruze Diesel - 16 Ram 1500 Limited
16 KTM 1290 SuperDuke R - 18 GasGas TXT300GP
Some of my parts came yesterday and today. Still waiting on the passenger rocker panel. So after work today I started cutting out the floor and realized there's a second cab mount "brace" that I didn't see or know about before. So tomorrow I'm going to see if it's available otherwise I'll have to make one. Found some more rust in the rocker I'm already replacing and some in the lower door skin. This weekend I'm dragging the cab out of the corner to see if I want to replace the whole door, or just get a lower skin. After I found that I started grinding all the burrs off from the thousand self tappers ran into the floor. Which killed a flap wheel in no time. So I took a break from the cab and focused on getting the broken leaf springs off. The shackle bolts seized in the bushings as expected, so I just cut the shackles in half and called it good for now since I'll be pressing new bushings into the frame at a later date. Now to the front, to my amazement, one of the bolts came out of the bushing with the help from my 5 pound mini sledge. But no luck on the other side, so its still hanging on the frame for now. But enough rambling on with a few pictures.
Sent from an unknown location using Tapatalk
-Ryan-
91 Slow'noma - 14 Cruze Diesel - 16 Ram 1500 Limited
16 KTM 1290 SuperDuke R - 18 GasGas TXT300GP
Moneypit, here's a couple pictures of my dash. Top is crack free, but the previous owner cut the lower section for stereo stuff I assume. But it looks like maybe the black portion is replaceable. But I'm not sure. If I can't find a 82-85 for it I'll toss this one back in.
Sent from an unknown location using Tapatalk
-Ryan-
91 Slow'noma - 14 Cruze Diesel - 16 Ram 1500 Limited
16 KTM 1290 SuperDuke R - 18 GasGas TXT300GP
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks