beat up ford taurus... think its like a 1998?

[nitrouspete]

my girls car transmission took a shit last night. We got her a new car this morning. runs, but wont go past 35 mph. it just goes into neutral it seems till its at like 5mph again then it has a gear again.

its rusty, its green, it sits down like the normal issue with these cars. has 3 new tires on it put on 2 weeks ago, it has an exhaust leak.

$500.00 firm. clean title. (shes gonna dig it out today, should be ready to leave in a day or two so she can clean it out)

Going to scrap or a junk yard in 2 weeks and ill pull the rims and tires off and sell them separate. if you need an engine for yours or parts this could be good, or if you need a cheap fixer upper for your kids first car or something.

313-289-7516 Pete, Newport MI.

Will need to be towed but it will load on the trailer by itsself. can tow for extra $.

[derbydad276]

wait to scrap it .... scrap price is down under $100 a ton

[4Gas$]

Are wheels 15" or 16"?

Photos of wheels?

How much $$$ for the set?

[nitrouspete]

wait to scrap it .... scrap price is down under $100 a ton

Thanks buddy.

[nitrouspete]

Are wheels 15" or 16"?

Photos of wheels?

How much $$$ for the set?

Ill check tonight with photos and get back to ya.

[Ponyryd]

Fwiw I took in a 2000 two weeks ago when scrap was at $100/ton CDN, I got $250 for a complete car, cats and wheels.

Are wheels 15" or 16"?

Photos of wheels?

How much $$$ for the set?

Unless it's an SHO the factory size would be 205/65/15, which changed in 2000 to 215/60/16 due to bigger brakes.

[moneypit]

Scraps in the shitter heavy steel is 5.5 cents a lb shrewd is 4.5 a lb. or 90 a ton

[4Gas$]

Fwiw I took in a 2000 two weeks ago when scrap was at $100/ton CDN, I got $250 for a complete car, cats and wheels.



Unless it's an SHO the factory size would be 205/65/15, which changed in 2000 to 215/60/16 due to bigger brakes.

Thank you for the info. I need the 16".

[derbydad276]

Scraps in the shitter heavy steel is 5.5 cents a lb shrewd is 4.5 a lb. or 90 a ton

Ive heard cars are down below about $75 a ton

[dudek]

this would explain why im so dam slow at work making steel...