For Windsor Engines
Both Reed Cams - Used to be the best of the best, until they went out of business a few years back.
Both cams are in excellent shape. Great to 7,000 RPM and pull hard all the way. Great idle
Hyd Roller:
Advertised Duration - 270 Degrees Intake - 280 Degrees Exhaust
Duration @ .050 - 232 Degrees Intake - 240 Degrees Exhaust
Lift - .557 Intake - .576 Exh
110 Degree Centerline - Ground in at 106 Degrees (4 Degrees Advanced without bushings)
Dyno Time only - A bit more aggressive than the F303 cam
Mechanical (solid) Cam and Lifters
T-280-286UL-6A2
Advertised Duration - 280 Degrees Intake - 286 Degrees Exhaust
Duration @ .050 - 248 Degrees Intake - 258 Degrees Exhaust
Lift - .542 Intake - .542 Exh
110 Degree Centerline - Ground in at 106 Degrees (4 Degrees Advanced without bushings)
.019" lash intake - .021 lash exhaust
Includes lifters
Crane Springs
#99893-16
1.460" OD
391# Rate
http://www.summitracing.com/parts/crn-99893-16
Solid cam and lifters were only been used for one season on my oval track car. Never turned more than 7,000 RPM - Everything is in great condition.
Hyd Roller Cam - $125
Solid cam and lifters - $95
Springs - $40
Gary
rce789@yahoo.com
Reed_Card-SM.jpg
Crane_Springs-SM.jpg
Bookmarks