After months and months of dicking around with this Schwartz piece o'crap chassis, I finally have the last hurdle just about fixed.....Remember, this is a custom built chassis for the 1964/1965 Chevelle....Not one thing was correct. After fixing what I thought was everything and having it powdercoated, I go to bolt it up to the body and the rear kick-ups interfered with the trunk pan. After being so sick and in and out of the hospital that I couldn't work on the chassis for several months. I am finally beginning to feel a bit better so an old friend and I tackle the project...Here are some pictures of the interference, the cut away and finally everything 90% welded in place......
grr
Left side interference with trunk pan
Right Side interference with trunk pan
Body mounts Miss the frame by 2"
Also offset....
Cut the interfering section part of the frame away
Cutting and fitting rear section
Grinding on front part of frame while still bolted to body
More grinding
Cutting and fitting new frame section
One new piece tacked in place
Welding in pass side down piece
Finished pass side
Bookmarks