Need a hand from a SBF Mustang guy

[joestang]

So I've got a 95 Cobra that is 99% back together, but I cant figure out the damn throttle cable bracket / attachment. I'm just trying to get it fired up and selling it this summer.

Its a 95 Cobra with a fox body throttle conversion & Accufab TB, so its not the typical setup and its beyond my knowledge.

I'm not looking for charity, I'll pay for your time in cash or beer, whatever you prefer. It'll probably take an expert 10 minutes to fix.

Car is in my garage in Macomb twp. Reply or PM me if you're interested, or if you know someone. Otherwise I'm ripping this thing down to a rolling chassis and parting it out.

[sofa king]

Post up a photo on what you're trying to do...Can probably handle it that way.
Share it on Corral.net too, then you get info from tons of experts....

[joestang]

Ok, hope this helps. I guess my biggest issue is with the bracket. I am guessing I dont have it in the right spot, but I'm not sure. I have the bracket using two of the upper intake bolts, which was the only two bolts I found anywhere that had the correct spacing and alignment, but something is not right.






To top it off the end of the throttle cable that is the "socket" broke into two pieces. So I need to either repair that, buy a new threaded piece, or a whole new throttle cable.

[joestang]

Here is the throttle bracket I have, it looks a lot different to me than anything I've come across for the Fox or 94/95 setups.

[svopro]

Your missing the elbow for 94/95 on which it bolts

[mustangmike6996]

Your missing the elbow for 94/95 on which it bolts

Good call, they did have the different intake elbow.


As far as the broken cable end, try Mcmaster Carr

[DeFormula]

I have a 94-95 trickflow intake elbow sitting on my workbench. What's it worth?

[joestang]

I definitely don't need the elbow, its got the fox throttle conversion done to it. I've ran it before with no elbow, I just don't know how this damn bracket mounts correctly with the cable I have.

I guess I can buy the Accufab TB spacer with the bracket adapter built-in, and then buy the OEM fox body bracket. But I know for a fact it was not ran that way before, and it worked perfectly.

[svopro]

Good luck !