Results 1 to 10 of 10

Thread: Parting out 95 Cobra (347 motor, some nice parts)

  1. #1
    Club Member joestang's Avatar
    Join Date
    Dec 2003
    Location
    Macomb Twp
    Posts
    1,456

    Default Parting out 95 Cobra (347 motor, some nice parts)

    So, I've decided to part ways with my 95 Cobra. I'll be starting to take stuff off this weekend, and the intention is to take as much off that will sell, and then sell it as a rolling chassis.

    I am open to selling it as-is right now, and I would need $6k for it as it sits. It starts and runs, but its not running right and I'm tired of watching it collect dust. PM me for my cell for more details or if you're serious about buying it whole. I'm gonna give it about a week before I start pulling parts off.

    1995 Cobra (have the SVT certificate as well) - 100k miles on the body, 50k on the transmission, and less than 5k on the engine

    Engine

    Ford Motorsport B50 Block
    347CI and 10.5:1 compression with 64cc heads
    Diamond forged pistons
    Eagle Forged crankshaft
    H-beam forged rods (I believe they are Eagle as well)
    Rebuilt by Champion Racing in Center Line summer of 2012

    Canfield 195 heads
    Bowl blend (similar design to Trickflow High Ports)
    Ferrea 6000 valves and custom setup solid roller springs

    Edelbrock Victor 5.0 intake

    Upper has been extrude hined & inlet opened up to 90mm to match 90mm throttle body
    Lower has been port-matched to Fel-Pro 1262

    Accufab 90mm Race throttle body
    Custom 4" aluminum intake tubing & big K&N filter

    Exhaust
    Entire exhaust from headers to mufflers has been ceramic coated inside & out at QC coatings in Shelby twp.
    Accufab 1 3/4" longtubes with 3" collector
    Accufab 3" H-pipe
    Hooker Aerochamber mufflers with turndowns

    Tremec 3550
    Steeda Triax shifter
    Quicktime SFI bellhousing
    Mark Williams 4" custom aluminum driveshaft

    Detroit Locker rear end
    4.10 Ford Motorsport gears
    Ford Motorsport diff cover with girdle

    Wheels/Tires

    American Racing Torq Thrust II - Chrome center spokes & polished aluminum lips (discontinued, very hard to find the chrome ones)
    17x9.5" front, and 17x11 rear

    Front tires - Falken RT615 275/40/17 (great shape, very low miles)
    Rear Tires - Nitto 555R Drag radials 315/35/17 (decent shape, one season left)



    Obviously there is a ton more little parts, but thats the major stuff. I havent put prices for the individual stuff because I want to see if I can sell it whole first.

    PM me for my cell if you're interested. Thanks



    1995 Mustang Cobra - Just your typical 411rwhp N/A 347



    http://www.motownmuscle.com/forums/image.php?type=sigpic&userid=296&dateline=12923019  35

  2. #2
    Forum Member bad302's Avatar
    Join Date
    Mar 2005
    Posts
    1,881

    Default

    Quote Originally Posted by joestang View Post
    So, I've decided to part ways with my 95 Cobra. I'll be starting to take stuff off this weekend, and the intention is to take as much off that will sell, and then sell it as a rolling chassis.

    I am open to selling it as-is right now, and I would need $6k for it as it sits. It starts and runs, but its not running right and I'm tired of watching it collect dust. PM me for my cell for more details or if you're serious about buying it whole. I'm gonna give it about a week before I start pulling parts off.

    1995 Cobra (have the SVT certificate as well) - 100k miles on the body, 50k on the transmission, and less than 5k on the engine

    Engine

    Ford Motorsport B50 Block
    347CI and 10.5:1 compression with 64cc heads
    Diamond forged pistons
    Eagle Forged crankshaft
    H-beam forged rods (I believe they are Eagle as well)
    Rebuilt by Champion Racing in Center Line summer of 2012

    Canfield 195 heads
    Bowl blend (similar design to Trickflow High Ports)
    Ferrea 6000 valves and custom setup solid roller springs

    Edelbrock Victor 5.0 intake

    Upper has been extrude hined & inlet opened up to 90mm to match 90mm throttle body
    Lower has been port-matched to Fel-Pro 1262

    Accufab 90mm Race throttle body
    Custom 4" aluminum intake tubing & big K&N filter

    Exhaust
    Entire exhaust from headers to mufflers has been ceramic coated inside & out at QC coatings in Shelby twp.
    Accufab 1 3/4" longtubes with 3" collector
    Accufab 3" H-pipe
    Hooker Aerochamber mufflers with turndowns

    Tremec 3550
    Steeda Triax shifter
    Quicktime SFI bellhousing
    Mark Williams 4" custom aluminum driveshaft

    Detroit Locker rear end
    4.10 Ford Motorsport gears
    Ford Motorsport diff cover with girdle

    Wheels/Tires

    American Racing Torq Thrust II - Chrome center spokes & polished aluminum lips (discontinued, very hard to find the chrome ones)
    17x9.5" front, and 17x11 rear

    Front tires - Falken RT615 275/40/17 (great shape, very low miles)
    Rear Tires - Nitto 555R Drag radials 315/35/17 (decent shape, one season left)



    Obviously there is a ton more little parts, but thats the major stuff. I havent put prices for the individual stuff because I want to see if I can sell it whole first.

    PM me for my cell if you're interested. Thanks



    What's wrong with it engine problems

  3. #3
    Forum Member bad302's Avatar
    Join Date
    Mar 2005
    Posts
    1,881

    Default

    Is this still for sale let me know I am interested you can call or text me at 586 381 9280

  4. #4
    Forum Member gub's Avatar
    Join Date
    Nov 2008
    Location
    Clinton Twp
    Posts
    1,082

    Default

    Interested long tubes, victor intake, throttle body, and intake pipe. 586 610 0558 pls text me

  5. #5
    Club Member joestang's Avatar
    Join Date
    Dec 2003
    Location
    Macomb Twp
    Posts
    1,456

    Default

    Sorry guys I know I have PM's to answer as well. I had some major work stuff kick my ass this week and havent had a free minute to get caught up. I'll answer everyone tonight. Its def still for sale, and I havent started parting it down yet.
    1995 Mustang Cobra - Just your typical 411rwhp N/A 347



    http://www.motownmuscle.com/forums/image.php?type=sigpic&userid=296&dateline=12923019  35

  6. #6
    Elected Club Official
    Join Date
    Sep 1999
    Location
    "The Place to Be"
    Posts
    35,655

    Default

    As you can see by Joe's join date and ad he's been around forever and is pretty transparent about the cars issues. If I was in the market I wouldn't hesitate to buy from Joe even though I haven't seen him in years.

  7. #7
    Club Member joestang's Avatar
    Join Date
    Dec 2003
    Location
    Macomb Twp
    Posts
    1,456

    Default

    Thanks man, appreciate that. All pm's answered.
    1995 Mustang Cobra - Just your typical 411rwhp N/A 347



    http://www.motownmuscle.com/forums/image.php?type=sigpic&userid=296&dateline=12923019  35

  8. #8
    Club Member daveg's Avatar
    Join Date
    Nov 2003
    Location
    Hell, Mi
    Posts
    5,358

    Default

    Quote Originally Posted by CMYZ28 View Post
    As you can see by Joe's join date and ad he's been around forever and is pretty transparent about the cars issues. If I was in the market I wouldn't hesitate to buy from Joe even though I haven't seen him in years.
    I can second that as well. I believe I bought parts from him years ago when he lived in Howell.
    Quote Originally Posted by sidewayscoupe View Post
    Will someone please lock this fucking thread.

  9. #9
    Club Sponsor ReiKo's Avatar
    Join Date
    Nov 2003
    Location
    Workin
    Posts
    39,889

    Default

    Third...
    Quote Originally Posted by Admiral Isoroku Yamamoto
    “You cannot invade the mainland United States. There would be a rifle behind each blade of grass.”

  10. #10
    Club Member joestang's Avatar
    Join Date
    Dec 2003
    Location
    Macomb Twp
    Posts
    1,456

    Default

    Thanks guys!

    I am going to make another thread in the car sales forum since I'd much rather sell it running first.
    1995 Mustang Cobra - Just your typical 411rwhp N/A 347



    http://www.motownmuscle.com/forums/image.php?type=sigpic&userid=296&dateline=12923019  35

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •