Chevy Techs

[Driven2slow]

Hey guys. I have a Chevy HHR. Again, Im getting bored of the car so Im making some changes to it. This is the first time Ive owned a car for more than a year.

I installed the factory heated seats in it. They were an option in the HHRs.

I installed the HVAC controllers with the heated seats buttons. Now I need a Chevy dealer to program the BCM so the heated seats can be activated.

Anyone a GM techs that already know the process and can do it?

Thanks

[Detroit Gearbox]

Let me know how that works out 4 you.... I would love heated seats in my HHR

[WhiteHawk]

I don't think you need a dealer, I think you need a hacker. Usually dealers can't do custom work, they just load what your Vin says to load. Try gen5diy they do stuff like that.

-Geoff

[Beigg]

try https://www.whiteautoandmedia.com/in...d=46&Itemid=57 ?

[moneypit]

Im pretty sure my scan tool can do it

[Driven2slow]

Let me know how that works out 4 you.... I would love heated seats in my HHR

Check to see if you have the connector for the heated seats under your seats. Theres a picture of what it looks like in the following link:

https://www.chevyhhr.net/forums/mods...ts-swap-42728/

[Driven2slow]

Im pretty sure my scan tool can do it

If you use the same scan tool as dealers do, it might be possible:

https://www.chevyhhr.net/forums/mods...ts-swap-42728/

[1BADAIR]

I believe the dealer has to call and get a (VSI number??) They write the new program then the dealer can reflash

[jspec]

I am in the process of doing the same exact thing in my 2008 Sebring convertible. I bought a very nice leather interior with heated seats at the junk yard. I got the dash switch for the heated seats. I was hoping for plug and play but I am not to that point yet. Working on the rear seat removal and removing the 9 years of crap that collected under the seats.

[Driven2slow]

I believe the dealer has to call and get a (VSI number??) They write the new program then the dealer can reflash

I read multiple threads on the HHR forum and the dealer just has to change the part number for the HVAC controls to the number on the one with the heated seats buttons.