New ride for a while

**mustangmike6996** · 04-22-2018, 08:37 PM

Finally got the passenger side O2 sensor replaced. Only had to wrestle the manifold out

It was really seized up. Took a lot of ass to break it free. Also, GM must have been on some major drugs when they designed this system layout. No room for tools/hands etc. I've worked on some ridiculously designed cars but this one pretty much takes the cake.

I also just bought new injectors. One injector is clogged. I can feel it firing but it's not fueling. Fuel Injector Connection sells a set specifically for the 1993 LT1 which flows different than 92 or 94-96.

Sent from my XT1635-01 using Tapatalk

**ultradriver10000** · 04-23-2018, 06:07 AM

that exhaust looks like its in great shape, at least it all unbolts.

**mustangmike6996** · 04-23-2018, 09:19 AM

Originally Posted by ultradriver10000

that exhaust looks like its in great shape, at least it all unbolts.

Its been stored indoors for most of its life. I was shocked when the bolts came loose with hand tools. The flange was a very tight squeeze

**mustangmike6996** · 04-29-2018, 07:48 PM

Washed and Clay barred the paint. Polished it with my new TorqX Chemical Guys wheel and waxed it.

Sent from my XT1635-01 using Tapatalk

**AutoRoc** · 04-29-2018, 08:12 PM

hell yeah. did you use that new speed clay kit? it looks like the clay has a little vessel it sits in instead on your hand/fingers..

**mustangmike6996** · 04-29-2018, 08:16 PM

I did. I was pretty skeptical but it worked. I did my 2013 F150 with it too (ton of rail dust etc.). It is a big time saver but be careful on dark paint. You don't feel it load up with debris like you do with the clay so if it loads up and you keep on going, you get micro scratches. It's not bad, just a bit different.

**Ghost Stang** · 05-01-2018, 08:01 AM

Nice Corvette like the color also. I have an 87 C4 Corvette

**mustangmike6996** · 05-08-2018, 11:36 PM

Do you have any pictures?

Not much is new, installed some muffler deletes. It sounds pretty good when in the throttle and is tame at idle.

Going to replace the serp belt, air filter, tires, and clean the EGR.