Can anyone make these?

**JpMotorsports** · 10-19-2018, 12:14 PM

I am looking to make a set of tow tabs for my 67 Chevelle. I swear I have seen this shape for the material but cant recall what its called and where I saw it. Want to give my chevelle a "day 2" look and these were very popular back in the day. I have attached some pictures any help would be great.34620.jpg 34621.jpg 34622.jpg 65tabinstructions.jpg

**mikesfastss** · 10-19-2018, 12:42 PM

My brothers shop can do it if you have dimensions or can take the car there to fit them, Carter’s welding 313 849 1610

**mustangjoe87** · 10-19-2018, 01:10 PM

Looks like its just some 1/4 plate, you can get the material from the hardware store and make them up pretty easy if you have a decent angle grinder

**Krazybones** · 10-19-2018, 04:55 PM

The added weight will help keep the front wheels planted during a hard launch!

**riche** · 10-19-2018, 05:11 PM

DID these cars break so much they needed top points?

**JpMotorsports** · 10-20-2018, 03:33 PM

Originally Posted by riche

DID these cars break so much they needed top points?

People used them for flat towing drag cars to the tracks since most people didn't have trailers and would pull them with the family station wagon

**JpMotorsports** · 10-25-2018, 11:09 AM

Been do a lot of research on these thing and learning about the "Day 2" process and found out a lot of guys also made their own tabs. I mocked these up from cardboard to see what I could do. Now I just need some steel and make these happen.

57.JPG 58.JPG 59.JPG