Results 1 to 7 of 7

Thread: nitrous limit

  1. #1
    Junior Member
    Join Date
    Mar 2011
    Location
    Highland Park, Michigan
    Posts
    24

    Default nitrous limit

    what is a safe limit on a 87' ford 5.0 block filled(hardblok filler) to water pump holes, heavy main caps, arp studs throughout, line bored, stock nitrided crank, scat cap screw rods(I beam), crank has oil holes scalloped, forged flat top pistons w/ increased ring gap. balanced assembly. have between 100-250 cheater 2 stage.
    Last edited by fivepoint-0; 01-18-2019 at 06:28 PM. Reason: added info

  2. #2
    Club Member
    Join Date
    Nov 2003
    Location
    Rochester Hills
    Posts
    4,700

    Default

    Good question. I've seen stock ones almost split in half with 150 shot.

  3. #3
    Club Member Beigg's Avatar
    Join Date
    Feb 2009
    Location
    I am here >x<
    Posts
    5,314

    Default

    if you can control e-timing while using a progressive/launcher controller for the system, it should enable more nitrous capability compared to a traditional hitting system.

    From my experiences; Even if you built an identical engine, ymmv with the amount of spray it could potentially ingest before it lets go.

  4. #4
    Club Member AutoRoc's Avatar
    Join Date
    Nov 2003
    Location
    Dearborn
    Posts
    5,626

    Default

    Send it!!!
    Denny Villemure
    PSSSSSSST!
    Vortec 4200 Turbo IROC-Z on 15psi
    11.26 @ 126mph

  5. #5
    Club Member black88coupe's Avatar
    Join Date
    Feb 2005
    Location
    YES my shit is slow and NO you can't drive it!
    Posts
    6,664

    Default

    Spray it til the block splits then step it down one jet size.

    Did the wizard ever get back to you about that brain?????

  6. #6
    Club Member mikesfastss's Avatar
    Join Date
    Oct 2008
    Location
    at home with the family
    Posts
    4,237

    Default

    Lmao
    mike

  7. #7
    Club Sponsor 347convert's Avatar
    Join Date
    Nov 2005
    Location
    Canton
    Posts
    6,759

    Default

    I split mine with no shot lol

    It is Cylinder pressure and RPM, I feel like you can have 1 of those, But not both lol.

    I had a 306 with 150 shot and it loved it, I maybe ran 20 bottles through it. The only thing that broke was the top rings.

    The 347 I had broke in 2 with no shot, but I guess 11 to 1 and 7500 RPM will do that.
    Last edited by 347convert; 01-17-2019 at 11:14 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •