Windshield rust

[DetroitStyle]

I have some mild rust bubbling around the windshield and on the a-pillar of my Landcruiser. The windshield is being replaced due to a crack. Anything I can do while it’s out to slow/stop this short of chopping out sheet metal and replacing it?

I am looking for something that will buy me a few years. I realize once it’s started, surgery is the only complete fix... but that’s out of the budget



Sent from my iPhone using Tapatalk

[mikesfastss]

Chassis saver or por-15, be cautious and tape it all off to avoid a nasty mess.

[4Gas$]

^^^ What Mike said.

You might want to ask the windshield installer (if they are coming
to your home) to remove it one day, then come back in a day or
two to install the new windshield, to give you time to work on it
and have it good & dry.

[NVR2FST]

The place we took my son's Ranger too for a new windshield offered to grind it down and put some sort of rust inhibitor on it. Might be worth asking

[DRAG-ULA]

Is sandblasting those areas while the glass is out an option? That doesn't look like cancer rust, (yet). If you can't do that I'd use some rust converter like naval jelly.

[stevelknievel]

Another vote for chassis saver or por15 but if you use por make sure you topcoat it