Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: 2.3t Automatic trans options

  1. #1
    Club Member lone racer's Avatar
    Join Date
    Mar 2008
    Location
    WHAT ?
    Posts
    1,092

    Default 2.3t Automatic trans options

    89 2.3t what are my options for an automatic trans?
    Specific info is needed, c4 from a pinto wagon- I assume any year with 2.3.
    But what else? c3.
    It seems this question is hard to get solid answers.
    Last edited by lone racer; 09-12-2019 at 06:47 PM.
    You might not feel it but sure as hell act it

  2. #2
    Forum Member wickettoby1's Avatar
    Join Date
    Oct 2013
    Location
    SE Michigan
    Posts
    209

    Default

    Didn’t the turbo coupes come with an A4LD? Unless you’re looking for more of a “race” trans.

  3. #3
    Club Member lone racer's Avatar
    Join Date
    Mar 2008
    Location
    WHAT ?
    Posts
    1,092

    Default

    I honestly haven’t researched, but yes seems they did. Although they do seem notoriously weak.
    I am looking for any possible options, preferably not computer controlled or at least easily controlled.
    Not a “performance” application.
    You might not feel it but sure as hell act it

  4. #4
    Elected Club Official
    Join Date
    Sep 1999
    Location
    "The Place to Be"
    Posts
    35,655

    Default

    Seems to be a lot of info on this site

    http://forum.turboford.org/cgi-bin/u...DaysPrune=1000

  5. #5
    Club Member lone racer's Avatar
    Join Date
    Mar 2008
    Location
    WHAT ?
    Posts
    1,092

    Default

    Was finally able to have an hour to search a little deeper, just trying to not make a mistake in “thinking” it was right. I appreciate it guys, any info /guidance is welcome
    You might not feel it but sure as hell act it

  6. #6
    Forum Member wickettoby1's Avatar
    Join Date
    Oct 2013
    Location
    SE Michigan
    Posts
    209

    Default

    Well do you want/need overdrive? If yes there aren’t a whole lot of “bolt in” options when it comes to automatics especially non electronic versions.

  7. #7
    Club Member lone racer's Avatar
    Join Date
    Mar 2008
    Location
    WHAT ?
    Posts
    1,092

    Default

    No, overdrive is unnecessary. Could be handy for my purpose if I come across one but not necessary, especially if they are hard to find.
    You might not feel it but sure as hell act it

  8. #8
    Forum Member Detroit Gearbox's Avatar
    Join Date
    Jan 2007
    Location
    Warren Michigan
    Posts
    4,912

    Default

    Anything can be converted to fit a 2.3.... but guessing the costs would be prohibited for you.
    As far as bolt up factory automatics... C-3/C-4/A4LD were the three that ford used.... I recall working on lots of turbo 4cly mustangs back in the day... some were mildly impressive for their time.

  9. #9
    Club Member lone racer's Avatar
    Join Date
    Mar 2008
    Location
    WHAT ?
    Posts
    1,092

    Default

    With above mentioned, some were behind multiple engines with obviously different bell housings except the a4ld I assume. Can bell housing be swapped on the 6&8 ? Is the bell off the t9 usable on any auto swaps?
    You might not feel it but sure as hell act it

  10. #10
    Forum Member wickettoby1's Avatar
    Join Date
    Oct 2013
    Location
    SE Michigan
    Posts
    209

    Default

    I don’t believe Ford offered a lockup converter for the C4 so using that trans for any highway driving will be a lot less efficient than using the A4LD trans.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •