Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: 2004 GMC Envoy XL-Sold

  1. #1
    Elected Club Official
    Join Date
    Sep 1999
    Location
    "The Place to Be"
    Posts
    35,655

    Default 2004 GMC Envoy XL-Sold

    Selling the wife's former daily driver since she upgraded to a newer car earlier this year. I've put quite a bit of time/money into this SUV over the past few months to make sure it's as roadworthy as possible, would make a great first car for someone or a second vehicle. It has higher mileage but I wouldn't hesitate to drive this thing anywhere, these inline 6 cylinder 4.2L's are tanks. I did the updates/maintenance as if I was keeping this car or selling to a family member, the wife has owned this car for at least the past 10 years so it hasn't been passed around.

    Things all done within the past 500 miles:
    1. 4 new tires
    2. Brakes on all 4 corners
    3. Replaced both front wheel bearings(Used MOOG)
    4. AC Delco Battery
    5. Entire front-end gone through, parts replaced and alignment done.
    6. New front windshield replaced at Safelite

    The Good- 4x4 and is a beast in the snow, remote start/alarm, has 3 rows of seats, aftermarket radio, transmission was rebuilt a handful of years back and shifts great, dependable with no known mechanical issues.

    The Bad-It's 15 years old and been in Michigan all of it's life so it has rust. Pics show the rust at the bottom of the doors/small rust on hood, worst is at the bottom of the rear hatch. At some point i'd probably put new shocks on it but that's just a personal preference for me.

    I hate dealing with selling cars, KBB says up to $3k for private party based on condition and looking to get $2,000 for this which is fair based on the fact that i know this car is mechanically sound and work has always been done on it with good parts.

    Car is located on the westside in Livonia, send me a PM if you'd like to come look at it.

    Left side of Envoy.jpgRight Side of Envoy.jpgFront of Envoy.jpg
    Last edited by CMYZ28; 10-31-2019 at 05:37 PM.

  2. #2
    Club Member twotwoturbo's Avatar
    Join Date
    Nov 2003
    Location
    IN A VAN DOWN BY THE RIVER
    Posts
    5,724

    Default

    what are the miles on it?
    1990 mustang GT 5.0 sold 3-11-04 MISSED

  3. #3
    Elected Club Official
    Join Date
    Sep 1999
    Location
    "The Place to Be"
    Posts
    35,655

    Default

    Quote Originally Posted by twotwoturbo View Post
    what are the miles on it?
    I believe it has 220kish, at work so don't have the exact mileage but can look later. Look up reviews on the 4.2 Inline 6 in these if you aren't familiar, no reason they can't go 300k+ with regular maintenance. This has always had good oil/regular changes etc. and I'd honestly keep it for a second car if we didn't already have 5+ vehicles for 2 people.

  4. #4
    Club Member twotwoturbo's Avatar
    Join Date
    Nov 2003
    Location
    IN A VAN DOWN BY THE RIVER
    Posts
    5,724

    Default

    Quote Originally Posted by CMYZ28 View Post
    I believe it has 220kish, at work so don't have the exact mileage but can look later. Look up reviews on the 4.2 Inline 6 in these if you aren't familiar, no reason they can't go 300k+ with regular maintenance. This has always had good oil/regular changes etc. and I'd honestly keep it for a second car if we didn't already have 5+ vehicles for 2 people.
    ok thanks
    1990 mustang GT 5.0 sold 3-11-04 MISSED

  5. #5
    Club Member The Man's Avatar
    Join Date
    Nov 2003
    Location
    Macomb, MI
    Posts
    9,906

    Default

    why used Moog front wheel bearings and not buy new ones?

    Rick
    1993 Mustang LX Coupe

  6. #6
    Elected Club Official
    Join Date
    Sep 1999
    Location
    "The Place to Be"
    Posts
    35,655

    Default

    Quote Originally Posted by The Man View Post
    why used Moog front wheel bearings and not buy new ones?

    Shuttt it..

  7. #7
    Club Member Krazybones's Avatar
    Join Date
    Aug 2005
    Posts
    13,948

    Default

    Quote Originally Posted by The Man View Post
    why used Moog front wheel bearings and not buy new ones?

    I read that too and did the head turn and huh...
    ****MATT*****

  8. #8
    Elected Club Official
    Join Date
    Sep 1999
    Location
    "The Place to Be"
    Posts
    35,655

    Default

    Sorry that you're both simpletons :-)

    Deal pending..

  9. #9
    Club Member Krazybones's Avatar
    Join Date
    Aug 2005
    Posts
    13,948

    Default

    and uhhhhh... it looks like you used the Envoy as your own personal Spank Bank based on the inside of that windshield.
    ****MATT*****

  10. #10
    Elected Club Official
    Join Date
    Sep 1999
    Location
    "The Place to Be"
    Posts
    35,655

    Default

    Quote Originally Posted by Krazybones View Post
    and uhhhhh... it looks like you used the Envoy as your own personal Spank Bank based on the inside of that windshield.
    That's the outside where a neighbor kid decided it was a good target for an egg and hadn't been washed off yet and was the reason I took the pictures.. Anything else?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •