Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Detail people, step on in...GM plastic chrome cleaning

  1. #1
    Forum Member H.O. Driver's Avatar
    Join Date
    Dec 2005
    Location
    Boyne City, MI
    Posts
    813

    Default Detail people, step on in...GM plastic chrome cleaning

    Trying to get some of the pitting out of the chrome trim pieces on the yukon. The trim around the windows is good, just the line across the doors and around the fog lights. I am pretty sure neverdull won't help me being the chrome is usually sticker over plastic, is there any saving of them with rubbing compound or just pull them off. I know the fog lights I will just have to replace, which they are cheap on Amazon.

    Thanks.....

    Sent from my Pixel 4 using Tapatalk

  2. #2
    Club Member Golden's Avatar
    Join Date
    Jan 2004
    Location
    MI
    Posts
    22,841

    Default

    That stuff can be very tricky to clean up. What products do you have? Whatever you test, try it in a hidden area first. Possibly on the top half of a fog light area that’s hard to see, the part that angles up and out. You’d have to be on the ground to see it. Test very small areas.

    Here are a couple of products that I’ve heard other people have success with.

    P21S Multi-Surface Finish Restorer

    Mothers California Gold All-Chrome Cleaner
    1999 Z28. A4. Magnaflow catback and a lid. 60k miles.

  3. #3
    Club Member Golden's Avatar
    Join Date
    Jan 2004
    Location
    MI
    Posts
    22,841

    Default

    Btw, I’ve had luck with Meguiars cleaner wax. Again, small hidden test area!
    1999 Z28. A4. Magnaflow catback and a lid. 60k miles.

  4. #4
    Forum Member H.O. Driver's Avatar
    Join Date
    Dec 2005
    Location
    Boyne City, MI
    Posts
    813

    Default

    Quote Originally Posted by Golden View Post
    Btw, I’ve had luck with Meguiars cleaner wax. Again, small hidden test area!
    I have a good size collection of Meguiars product and some mother's wheel polish. I haven't tried the wax on it yet, just looking for suggestions so I don't mess it up. I ordered LED fog lights off Amazon that come with the housing and chrome bezel. They were $62 so that will be easier than polishing the fog light trim. The chrome sticker is peeling off the fog light bezel The strips down the side and on the running boards don't look like the fog lights, but are starting to not shine up with a bucket wash.

    Sent from my Pixel 4 using Tapatalk

  5. #5
    Club Member WhiteHawk's Avatar
    Join Date
    Oct 2003
    Location
    Metro Detroit, MI
    Posts
    15,471

    Default

    Those bezels are toast. You can see the chrome bubbling. Did you try the dealer? That truck doesn't look that old. Sweet truck though!

    -Geoff
    2016 Camaro Convertible 2SS

  6. #6
    Club Member Golden's Avatar
    Join Date
    Jan 2004
    Location
    MI
    Posts
    22,841

    Default

    Try the cleaner wax before the wheel polish as it will be less abrasive.

    I agree, sweet ride.
    1999 Z28. A4. Magnaflow catback and a lid. 60k miles.

  7. #7
    Forum Member H.O. Driver's Avatar
    Join Date
    Dec 2005
    Location
    Boyne City, MI
    Posts
    813

    Default

    Quote Originally Posted by WhiteHawk View Post
    Those bezels are toast. You can see the chrome bubbling. Did you try the dealer? That truck doesn't look that old. Sweet truck though!

    -Geoff
    Thanks, it's a 2016 with 100,000 miles on it. Only used one I could find under 50k

    Sent from my Pixel 4 using Tapatalk

  8. #8
    Forum Member H.O. Driver's Avatar
    Join Date
    Dec 2005
    Location
    Boyne City, MI
    Posts
    813

    Default

    Quote Originally Posted by Golden View Post
    Try the cleaner wax before the wheel polish as it will be less abrasive.

    I agree, sweet ride.
    I got gold class, cleaner wax and a cutting compound in Meguiars. Not using wheel polish, just telling you what I got. I will start with the cleaner, maybe try the clay bar in a spot to see if it comes off and then hit it with the wax.

    Thank you, the ride didn't look that good Sunday. Tried to get out to Crisp Point Light House. Got 5 miles from the light house and was breaking through the ice into mud holes. Decided to turn around before I buried it with no cell phone service. Can't wait until mid april when the salt and snow should be over so I can put the factory 22s back on it.

    Sent from my Pixel 4 using Tapatalk

  9. #9
    Club Member Golden's Avatar
    Join Date
    Jan 2004
    Location
    MI
    Posts
    22,841

    Default

    I was going to ask about the 18s, figured it was a winter setup. Please update this with your findings.
    1999 Z28. A4. Magnaflow catback and a lid. 60k miles.

  10. #10
    Forum Member H.O. Driver's Avatar
    Join Date
    Dec 2005
    Location
    Boyne City, MI
    Posts
    813

    Default

    Quote Originally Posted by Golden View Post
    I was going to ask about the 18s, figured it was a winter setup. Please update this with your findings.
    So far this stuff has brought the most shine back to it. Still has some pitting, but much shine now. I forgot to do a before picture.

    Sent from my Pixel 4 using Tapatalk

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •