Best sixty foot with stock suspension

**SVTSINR** · 03-01-2008, 04:26 PM

What is your best sixty foot with stock suspension style and no anti roll bar. I really want to put tailpipes back on the car this summer and the 12 passes I do all year doesn't justify turn downs and disconnecting the roll bar to drive around. I'm starting to think driving around with no sway bars isn't that smart either.

Please list suspension components and best sixty.
TIA

**fogged10** · 03-01-2008, 04:52 PM

1.31 in a s-10 on mtr! using a leaf spring traction bar set-up! 10.5" tire!

406 mtr/powerglide trans stock 7.5" rear end 10 bolt! lol

410 gear

**NVR2FST** · 03-01-2008, 05:04 PM

FWIW, you can get tailpipes to work with an anti-roll bar. You just need to have some made/ modified.

**SVTSINR** · 03-01-2008, 05:07 PM

Originally Posted by NVR2FST

FWIW, you can get tailpipes to work with an anti-roll bar. You just need to have some made/ modified.

I have the UPR bar and I don't think it gives as much room as others. I had a y-pipe custom made for the turbo and the guy didn't even want to try it.

**johnquick302** · 03-01-2008, 08:01 PM

Originally Posted by SVTSINR

I have the UPR bar and I don't think it gives as much room as others. I had a y-pipe custom made for the turbo and the guy didn't even want to try it.

he is being lazy, anything is possible.

i went 1.2860ft without a anti roll bar. 1.27 with...just easier to control with the car not twisting

**NVR2FST** · 03-01-2008, 08:29 PM

Todd Reiter can do it... and he is a UPR dealer so that's what he's used to dealing with. He is also a sponsor on here - Reiter's Metalcraft

Originally Posted by SVTSINR

I have the UPR bar and I don't think it gives as much room as others. I had a y-pipe custom made for the turbo and the guy didn't even want to try it.

**Fryguy302** · 03-01-2008, 09:32 PM

Todd Reiter put 3" tailpipes on Ryan's (OJ) car with a anti-roll bar.

**SVTSINR** · 03-01-2008, 09:33 PM

Originally Posted by NVR2FST

Todd Reiter can do it... and he is a UPR dealer so that's what he's used to dealing with. He is also a sponsor on here - Reiter's Metalcraft

Todd actually installed the UPR bar and my cage. When I asked him to do a OJ special on the tailpipes he gave me a look like it was't possible. Maybe I'll ask him again.

Originally Posted by johnquick302

he is being lazy, anything is possible.

i went 1.2860ft without a anti roll bar. 1.27 with...just easier to control with the car not twisting

John, what was your set up with out the bar. Air bag? shocks? sway bar?

**johnquick302** · 03-01-2008, 11:03 PM

Originally Posted by SVTSINR

Todd actually installed the UPR bar and my cage. When I asked him to do a OJ special on the tailpipes he gave me a look like it was't possible. Maybe I'll ask him again.

John, what was your set up with out the bar. Air bag? shocks? sway bar?

just adj uppers, boxed stock lowers, urethane bushings at that time wtih an airbag but it was empty. no sway bar.