through floor sub frame connectors

[jmb19]

Anyone know how many feet of 2 x 3 tubing is required to do the connectors in an 88 notch? Might be able to get it from work if I can get the guy some numbers.

[Team Z Motorsports]

Anyone know how many feet of 2 x 3 tubing is required to do the connectors in an 88 notch? Might be able to get it from work if I can get the guy some numbers.

we use 2 x 2 unless we are installing a ladder bar but either way it's 14 feet

[jmb19]

we use 2 x 2 unless we are installing a ladder bar but either way it's 14 feet

OK. Do you guys heat and bend slightly? In that white coupe build you guys are doing it looks like they are straight. All the others I have seen are angled and welded up in 3 different spots. You guys do beautiful work! Thanks for the info.

[Matt Paul]

I will post a picture you will see white chalk marks were Dave cut and made some bends then tig welded tohgether to make fit.

[black88coupe]

Anyone know how many feet of 2 x 3 tubing is required to do the connectors in an 88 notch? Might be able to get it from work if I can get the guy some numbers.

Jeff, You might not wanna use that stuff from work. It may be overkill thickness wise. I've got the best hookup in town for round or square tubing and it's right down the street from Zug. I'll even help you get it home if you need help. Call me at the shop or or my cell. 313-749-3413 (shop) 734-558-0938 (cell). Mitch

[fast gs 1150]

Jeff, You might not wanna use that stuff from work. It may be overkill thickness wise. I've got the best hookup in town for round or square tubing and it's right down the street from Zug. I'll even help you get it home if you need help. Call me at the shop or or my cell. 313-749-3413 (shop) 734-558-0938 (cell). Mitch

edward duffy???

[LilJuicedCoupe]

Sorry to hijack...but i have a question to go with this....my notch already has a 10pt welded in...and the cheap connectors welded underneath....how hard would it be and how beneficial would it be for me to go thru floor??

[jmb19]

edward duffy???

Thats exactly who he is talking about.

[cjmatt]

Sorry to hijack...but i have a question to go with this....my notch already has a 10pt welded in...and the cheap connectors welded underneath....how hard would it be and how beneficial would it be for me to go thru floor??

x2. ive got subframes from the previous owner. would it be worth keeping them and getting thru floors also? when do they usually become a necessity?

[black88coupe]

x2. ive got subframes from the previous owner. would it be worth keeping them and getting thru floors also? when do they usually become a necessity?

Contact Dave. You know he'll give you a straight answer on that.