Fox body weld wheel size and spacing for 10.5 x 28 - 10

[indyrt]

What are the hot dimentions for fit a 10.5 x 28 et street or drag radial

I have an 8" rim now. Also, when going to a 10" rim, is theat when the front lower wheel opening needs to be cut???

Thanks,

RT

[beesbadstang]

15x10 with 6.5 back space and a BFH to the inside area

[hangemhigh]

15x10 with 6.5 back space and a BFH to the inside area

x2......no cutting necessary of the front either.....28x10.5w fits great on mine.....

[93notch408]

thats w.o minitub?

[1nine84GT]

thats w.o minitub?

With out mini tubs.

[Anthony]

a 28x10 et street is smaller than a et drag of the same size. going off memory the et street actually measures 28x9ish.

a 325/50/15 radial will fit on a 15x10 with 6.5.... but youll be hammerin, alot!

a 275/60 radial is closer to the et street 28x10. and would fit without problems

[Billydroveit]

a 275/60 radial is actually 27.6"x9.5 or so tread i think.

[Anthony]

a 275/60 radial is actually 27.6"x9.5 or so tread i think.

\

which is pretty close

[beesbadstang]

For a 28 slick with 10inch rim you will need to a bit hammering on the inside wells.............be patient and careful and it will all work out...do a search on the web for that and there is quite a few write ups

[beesbadstang]

Sorry for the repost...............................