Best sixty foot with stock suspension

[Team Z Motorsports]

I've been a few 1.19's and usually 1.22 but that was about 6 years ago, I havent been down a track in 3 years,

We also build an ARB for tail pipes, we dont stock them so it's a custom order and usually takes 3-5 days depending on my powder coater!

[SVTSINR]

I've been a few 1.19's and usually 1.22 but that was about 6 years ago, I havent been down a track in 3 years,

We also build an ARB for tail pipes, we dont stock them so it's a custom order and usually takes 3-5 days depending on my powder coater!

What was your set up when you ran 1.22's?

I'm still debating if I need the ARB.

thanks

[igotaneed4speed]

Factory upper and lower arms just boxed them with some plate. Welded boxes and battle box kits, factory 4 cylinder springs with a "coil over" spring sllipped inside the pass. factory spring acting like a make shift bag. no- roll bar or sway bars front or rear.

1.37 60's on a 28" tire biggest problem is going straight the rear end actually gets pushed side to side cuz of the rubber bushings making it a PIA to go straight.

[Team Z Motorsports]

home made uppers and lowers and an anti roll bar, with Koni shocks and struts on a 28X10.5 tire!