Rear gear set installation?

[airtonics]

I'm going to be putting a new clutch in my C5 corvette after having some problems at the track the other day.. Since I have to take the whole rear suspension out of the car anyways I was considering having a 3.73 put in vs the 3.42 that's in the car.

Any recommendations on who to have put the gear set in? I would be brining them the rear diff so they won't have to remove it from the car.

Thanks for any suggestions!

Jon

[BigWheelinBubba]

Scott at Driveline Solutions 586-630-1098 he's in your neighborhood too.

[1BADAIR]

may want to look into the brace kit too

[airtonics]

Thanks Mike, I found his info I'll probaby shoot him an email later.

BadAir, I already have the DTE brace for the transmission if that's what you're referring to, if there's something else let me know.

[Pure84GTT]

are you doing the install yourself on the clutch ?

[airtonics]

Yes, I'm planning to install the new clutch/flywheel/slave/bearing myself and then take the rear diff to someone for the gear while it was out.

[Scott @ DLS]

Just checking in since his email last nite.