lol shit wait till they get a load of my all black bullets......
"BUILT not BOUGHT"
95 F250 4x4 12"s of lift on 38s
Cummins swap someday
To attempt the destruction of our passions is the height of folly. What a noble aim is that of the zealot who tortures himself like a madman in order to desire nothing, love nothing, feel nothing, and who, if he succeeded, would end up a complete monster!
Denis Diderot
Last edited by 03TRMN8R; 04-16-2010 at 05:13 PM. Reason: SP
So hot! I could have had a twin to that... Thanks douche bag for being selfish and keeping them on your Cobra!
You're welcome. The best way to go is to keep the stock fox length because then you can run ANY wheel you want. I went 94-98 on my last project and all the 17X9 stuff is right out at the edge. I can get most wheels, in the 05-09 offset which is +45mm but not all. Then I can match those +45mm offset style wheels with a +30 or +24mm for up front. American Muscle has all the same wheels in all the offsets.
I even ran the 99-04 axle in my yellow notch pictured above. Those are 1-1/2" longer on each side, so I had to run a 17X9 +45mm offset, and roll the lips. It was so close. I will NEVER run the 99-04 in a fox again. Too close for comfort. I had to run it though cause I ran the entire 2001 4.6L drivetrain, dash, ABS, traction control ect...
Has anyone seen a fox with Weld RT-S series rims? Im looking at gettin 17" black ones for my 89 hatch.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks