I'm helping a friend put together a mild, low budget 302. I'm looking for a set of cylinder heads(GT40's would be great) and one of the Ford alphabet cams.(probably an E or an F) Let me know what you have.
Thanks,
Rick
I'm helping a friend put together a mild, low budget 302. I'm looking for a set of cylinder heads(GT40's would be great) and one of the Ford alphabet cams.(probably an E or an F) Let me know what you have.
Thanks,
Rick
84 Mustang Coupe
I have a brand new E cam. $150
I have a Reed Hyd Roller - $100
http://motownmuscle.com/forums/showt...-(1)-Solid-Cam
Gary
I have some d5 iron heads. They have hydraulic roller springs good to .550 lift. Screw in studs and guide plates and minor porting on the exhaust. $200
I have a comeplete 1990 302 ho with f303 cam shaft and gt40 heads off a lightning with a vic jr. Intake
I have some ls1 heads. Their supposed to bolt right on
A gun is like a parachute. If you need one, and don't have one, you'll probably never need one again.
I have a used f303 $120 and a set of pac valve springs brand new $ 100
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks